FW_cArBoN
Junior Member
Registered: Oct 2009
Location: Kewaskum, WI
Posts: 9
|
I've removed the key's on two of the KTM's that I've had. We actually had issues with the contacts becoming loose in the switch and the engine would cut out while riding.
If you pull your key apart, you'll be able to see the wires that need to be connected, if you wish to hardwire them. There are 4 wires, but I cannot remember off hand the colors that need to be connected. The only issues with this is your fan will run for awhile after you ride, and you have no way of switching it off.
If not, you'll have to either get another ignition switch ( which I've done when i lost a key on my ktm ) or you will have check and see if your dealer has a spare as you should have gotten one with the purchase on your machine.
Jay
Report this post to a moderator | IP: Logged
|