[Changeing oil on 300EX] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Changeing oil on 300EX
(Click here to view the original thread with full colors/images)

Posted by: EXrider02

I havent ever changed the oil on a ATV before, but I want to change the oil on my 300EX..Is it difficult at all?

Posted by: kc 300EX

Not hard at all, All I do is, take out the boldt in the botom of the quad(and the washer) and let the oil drain into a pan, then put bolt back in, fill it up with oil, easy, Clean the oil filtyer too, thats 3 boldts, take it out, dont lose the spring, wash it in gas or sumthing, or just buy a new one(4 bucks i think)

Posted by: Scott

The oil filters I've seen are more like the paper type, not something that was supposed to be washed and re-used. A Yamaha I had used a reuseable oil filter, but I didn't think my 300 filter was reusable...

Posted by: 4punksdad

quote:
Originally posted by Scott
The oil filters I've seen are more like the paper type, not something that was supposed to be washed and re-used. A Yamaha I had used a reuseable oil filter, but I didn't think my 300 filter was reusable...

thats right...........don't wash the filter with gas. the LAST thing you want is gas in your oil.........buy a new filter at every oil change. its only a few bucks.

Posted by: "BLAHH"300!!

i got like 20 of em'....if i go to the honda shop for somethin' i just pick another up...they prolly think i change my oil everyday or somethin'....

don't forget to put oil back in it....i usually refill the oil to the mark on the stick..crank it WITHOUT messing with the throttle shuttng it off and checking again..add if it needs it.....