[alxe carrier barrings?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

alxe carrier barrings?
(Click here to view the original thread with full colors/images)

Posted by: Martin Blair

When shoul;d i replace these, i ahve heard after 100 hours i ahve had my bike for a whole year now and have just done some woods racing and trail riding small j8mps, should i replace these? i check the play and at the tires it has quite a bit of play up and down adn back and fortwh but not a whole lot its just noticable, it a little play normal?

thanks.

Posted by: Adam F

There's NO play on my bike. I'd say you need to replace the bearings before they let go and tear up everything inside the case. All of my friends who have 300's have chewed up their carriers because of bearings letting go.

Posted by: Jumbo747

yes REPLACE NOW! mine only went about half a inch up & down which may nopt seem like alot but is. it willl soon ruin your carrier, axle, & maybe even your swingarm if you dont fix soon. , i just did mine & it sucks big time. Get the bearings on ebay for super cheap, all you need is the rear axle bearings & 2 dust seals...have fun with this little project

Posted by: Martin Blair

ok i will do that now what about the hubs and spidles theres no play in them at all are they fine for next year?

Posted by: Jumbo747

hubs & spindles should be fine unless there is play...there was play in one of my hubs but I retightened that nut & it is fine now

Posted by: Dave400ex

I will also be doing this little project soon. I'm a little afraid what I will find because mine have not been replaced in 2 years. There's really no play though. If there is it's not much.