[Need help with AC Propegs on 250R] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Need help with AC Propegs on 250R
(Click here to view the original thread with full colors/images)

Posted by: sleestack68

I just got the new style propegs for my 87 250R but I have a few questions (since they don't come with instructions).

Anyway, these propegs come with a few nuts and bolts and spacers. My question is are those spacers supposted to be used with the bolts provided. I'm asking because that bolt are too wide for the spacer, they will not go through.

Also how are you supposed to bolt the footpeg mount on? You have to put bolt the 14mm bolt though the footpeg holder tube but none of my 14mm sockets are small enough to fit into the tube.

Finally, is anything supposed to hold the footpegs to the footpeg mounts?

Posted by: sleestack68

Anyone?

I guess I'll go buy and sixpack and figure it out myself.

Posted by: Pappy

best thing to do is play wit it:confused2

Posted by: "2-R's Rider"

quote:
Originally posted by sleestack68
I just got the new style propegs for my 87 250R but I have a few questions (since they don't come with instructions).

Anyway, these propegs come with a few nuts and bolts and spacers. My question is are those spacers supposted to be used with the bolts provided. I'm asking because that bolt are too wide for the spacer, they will not go through.

Also how are you supposed to bolt the footpeg mount on? You have to put bolt the 14mm bolt though the footpeg holder tube but none of my 14mm sockets are small enough to fit into the tube.

Finally, is anything supposed to hold the footpegs to the footpeg mounts?

I drilled a hole thru the aluminum pegs & straight thru the mount tube & installed a bolt to hold the pegs onto the mount tube..
you will need the rightt outside diameter socket to fit the 14 bolt inside the tube ...they are available ..

spacers provided are for the 87 ,since the motor mount is different than 86

Posted by: "2-R's Rider"

also I drilled thru the 2 pcs where they join between the frame rails (in front of motor ) & installed a bolt to add strenght to the installation .