[300 EX rear end] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

300 EX rear end
(Click here to view the original thread with full colors/images)

Posted by: cain73

I have a 01 300EX. On the bottom of the rear end there is a screw right in the middle between the sprocket and the break (but on the bottom) Does any one know what this screw is for?
is there any lube in there? and if so how do you fill it since the only opening is on the bottom?
I know this is probably in the book but mine has not come in yet and I would really like to know.

Posted by: darrell43031

that screw is to hepl hold your bearring carrier from wiggling loose. your supposse to loosen it when ever you adjust your chain tension. if you don't you put grooves in your bearing carrier which makes the bolt useless and your chain can come loose just from riding. and no you can't put lube in it. just make sure to loosen it when you adjust your chain and make sure to tighten it up whne your done

Posted by: cain73

Good thing I asked !!!

Posted by: Magicfan25

whoops.....didnt see that about takin that screw loose.... Adjusted the chain a few times without takin that loose... its still holdin though, i havent adjusted it in months