[300ex] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

300ex
(Click here to view the original thread with full colors/images)

Posted by: cheesy350

i want to get new handle bars for my 2003 300ex but i dont no where to put the the ignition holder...leave some suggestions

2003 300ex-stock for right now

Posted by: 300exOH

You can bore a hole on the right side of the ring that goes around the fuel tank.

Posted by: Chanman420q

u can either drill a hole in the plastic, get rid of the ignition or i think u can get a 250x ignition holder at a honda dealer....

aw puchie kid made a thread

Posted by: stonerider250x

the 250x ignition is in the same place as it is on the 300ex and when i baught new handle bars i had to take my ignition off cause i didnt want to drilla hole in my plastic

Posted by: ZSK

I cut the "flaps" off of the sides and just kept the middle (mine's on the left, best pic I got)it's tight but I can still get the key in and out even with a crossbar

http://www.imagestation.com/picture/sraid71/p22f91d49c335bff678bfe984bf5b67ea/fb86eb00.jpg

Posted by: bigfoot300ex

i zip-tied mine to the front brake rezi

Posted by: 250x#93

quote:
Originally posted by cleanshave300ex
I cut the "flaps" off of the sides and just kept the middle (mine's on the left, best pic I got)it's tight but I can still get the key in and out even with a crossbar

http://www.imagestation.com/picture/sraid71/p22f91d49c335bff678bfe984bf5b67ea/fb86eb00.jpg

Damn thats a good idea

Posted by: Diedrich

yeah i drilled a hole in the side of my plastic..i mean if u dont like it u can buy a new plastic piece for like $5. but i think it looks trick

Posted by: atvman6988

my reverse has been removed so i drilled out the reverse light in the head light plastic houseing it looks all right and is very practical (no reaching under frame ect) and it looks somewhat stock

Posted by: bayou boy

when I changed the bars on mine I made a bracket out of aluminum. it bolts to the headlight assembly where the phillips head srews are just inside where the bolt holes are in the headlight plastic for the handle bar bolts. the switch fits neatly between the bars and the headlight and it kind of fills that hole between them. It is strong and ez to make and it looks good as well..

Posted by: atv223

Tom Miller Motorsports makes a billet Al bar clamp that the swith fits into. It works and looks great!!

Posted by: quad_racer_19

just look a bit fown in the forums there is a thing called 300ex key relocate that i had posted check it out...lots of pics

Posted by: sportraxrider10

i made a bracket out of aluminum, it looks like this
http://www.imagestation.com/picture/sraid75/pa16c02b463b149eac0e63f67f441bde5/fb51ebd2.jpg
http://www.imagestation.com/picture/sraid75/pe70ed1a2c9b436d190dbb3edd6db9a9f/fb51ec83.jpg
http://www.imagestation.com/picture/sraid75/p1bc7025c7e27ac80624d3326726ea8b2/fb51ebd6.jpg

Posted by: quad_racer_19

hey honda300ex06

on your handlebar brackets did you have to stick any washers underneath your key mounting plate because i see there is a grove on my bracket

Posted by: Diedrich

hey man that brackets looks good

Posted by: sportraxrider10

quote:
Originally posted by quad_racer_19
hey honda300ex06

on your handlebar brackets did you have to stick any washers underneath your key mounting plate because i see there is a grove on my bracket

i'm not exactually sure what your talking about, could you explain what you mean more about the brackets?

Posted by: Out_Sider

i just zip tied mine to the bottom of my handle bars-inbetween the clamps- works great-doesnt look trick or nothing, but it gets tha job done