[who makes??!!] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

who makes??!!
(Click here to view the original thread with full colors/images)

Posted by: JHForman250R

who makes a seat latch system that works really good?? anybody got suggestions on where to get it or anything ??!!

Thanks
John

Posted by: knighttime

quote:
Originally posted by JHForman250R
who makes a seat latch system that works really good?? anybody got suggestions on where to get it or anything ??!!

Thanks
John

hmmm, not unless u get rid of the banana, lol

Posted by: JHForman250R

i tried to loose the bannana yesterday but couldnt find an avatar i liked

Posted by: racerx573

I made my own seat latch.

Posted by: JHForman250R

suggestions and how well does it work? what all did you need>?

Thanks,
John

Posted by: KY Woods Rider

I use an OMF seat latch. It is very secure and you'd have to break a few bolts to get it to come loose. My only complaint is that since it uses two spin-on knobs to hold the seat/rear fenders on, it takes more time to get it loose than some of the other latches that use clips.

Posted by: cletusEX

Yeah I run the same OMF seat latch. It works great and I couldn't imagine it ever coming off, but it does get to be a pain to spin on and off those knobs.

Posted by: JHForman250R

racerx can you tell me what you did to make yours?? guys who are you getting these from? i can find them in all my dealer catalogs and im getting pissed about it !! will the same one for a 400 fit an R??

Posted by: KY Woods Rider

I bought my OMF seat latch from Nac's about a year and a half ago when I was ordering some other parts. Also, I think C&D Racing carries OMF products. C&D is a board sponsor, so you might want to check out their prices too (their ad is running at the top of this page).

I went and checked one of my old Nac's catalogs just to be sure, and the R and EX have different part numbers. Also, the 86-87 R has a different part number than the 88-89 R.

Posted by: JHForman250R

i kinda figured there would be a difference dang it !! i knew about there being a difference in 86-87 88-89 cause i bought an arens chassis it uses all the 88-89 stuff so it made me have to buy extra stuff

Posted by: bongwater200

I cut out a piece of .095 flat 4130 in the same shape as the stock latch base, then welded in two 1/2" X 2" clevis pins with multiple holes. The clevis pins drop though the seat rubbers and you use cotter pins and fender washers underneath. This SOB is NEVER going to come loose! You could make the same thing using aluminum.... I just used 4130 because that's what I had around.

I like the OMF style latches, but when you're in a hurry, they're too much of a pain in the ACE to get off!