[My Motor Mounts] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

My Motor Mounts
(Click here to view the original thread with full colors/images)

Posted by: muff

check out the motor mounts I polished today, actually I only have one side of one of them done but it came out good considering I only went up to 600 grit dry sandpaper

Posted by: muff

before and after

Posted by: DantheEXman

good job

Posted by: Sparks425Ex

Are those the ones I just sent to ya.(Trans Red One) Or are those the ones that are on my quad right now?

Posted by: Pappy

looks good

Posted by: fourzerozero

ill trade ya. mine for ur polished ones lol

Posted by: muff

quote:
Originally posted by Nacs425ex
Are those the ones I just sent to ya.(Trans Red One) Or are those the ones that are on my quad right now?

no these are a different set that I had bought

Posted by: Pappy

muff.....i might have some work for ya

Posted by: muff

quote:
Originally posted by Pappy
muff.....i might have some work for ya

sounds good

another pic, and no your not cross eyed

Posted by: RUFIO

Im in the process of chroming the whole frreakin quad...currently im on the motor mounts....my nerf were connected to them as most are are and i took the two bottom screws out...but the top one is connected to eachother when i take them out will the engine be able to hold itslef up for awhile of will I have to put something there to hold her up for a while

Posted by: racin 400

the bottom mounts and headstay will keep it in place.or to be safe put a wrench between the frame and motor to be on the safe side.

Posted by: muff

yea you dont have to worry about it movin, theres 2 other bolts holdin it in place

Posted by: RUFIO

thanks

Posted by: MX26

quote:
Originally posted by muff
sounds good

another pic, and no your not cross eyed

Hey, the chick in that paper is pretty hott lookin

Posted by: honda400exrider

exactly how do u do this?:devil lol

Posted by: killed300ex

im with him how the **** you do this? Here is what i think you take like 300grit sand paper sand it then keep going with fner sand paper untill you get to like 1000 grit then take some mothers and just kinda polish it up with that but im not exatly what you need to do the polishing? any one help me out if i want to do some parts with just a rag work to polish it up?
killed

Posted by: muff

i start at 220, then 400, 600, then 1000 and 1500 once i get the paper, once the part is smooth use a buffing wheel (see pic below) I use a die grinder the red thing($30-50) hooked up to an air compressor ($300), with the compounds off www.eastwoodcompany.com apply the compound to the buff and then take it to the metal