[Clear Rad Tubing] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Clear Rad Tubing
(Click here to view the original thread with full colors/images)

Posted by: rossfnwalker

OK I SEE THAT SEE THRU RADIATOR TUBING FOR BANSHEE'S AND DIG IT BUT IN A HYBRID APPLICATION THIS WILL NOT WORK BUT I FOUND ALL OF THESE TUBING'S THAT LOOK LIKE THERE RATED TO DO THIS ANYONE TRY THIS IS IT THIS SIMPLE OR AM I MISSING SOMETHING?

AND THERE ARE SOME THAT LOOK LIKE THEY WOULD EVEN WORK FOR MY OIL LINES HERE IS A LINK AT WHAT I WAS LOOKING AT THERE ARE HUNDRED'S OF OTHER TUBES ON THIS SITE TAKE A LOOK TELL ME WHAT YOU THINK

http://www.mcmaster.com/#tubing/=3xk39o

Posted by: rossfnwalker

ANY ONE ? I'M GOING TO TRY IT ANYWAYS BUT WOULD LIKE SOME INPUT

Posted by: jcs003

http://www.exriders.com/vbb/showthr...threadid=401001

Posted by: hybrid.mx.11

i found some clear braided but the temp only goes to 175 so somethin bad would prolly happen if i throw them on my built crf motor pm me if ne1 thinks different

Posted by: kodymx13

quote:
Originally posted by hybrid.mx.11
i found some clear braided but the temp only goes to 175 so somethin bad would prolly happen if i throw them on my built crf motor pm me if ne1 thinks different

tried that. melted in 5 minutes.

Posted by: thedeatons

I bought the braided vinyl from Lowe's. Ran it many times. Multiple times in the dunes the coolant temp coming out of the cylinder head on my 265R was 250 degrees from running it too lean.... The tubing never melted at all... In fact I tried to stick a fork into it then and it wouldn't go.

The short answer is that the Lowe's braided vinyl works just fine.

James