[need help on oil tank question.] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

need help on oil tank question.
(Click here to view the original thread with full colors/images)

Posted by: bloodswet&gears

just got this eton 50 thunder for my boys. ran about 3 tanks of gas through it but the oil level in the oil tank has only dropped about 1/4 inch. it smokes a little but seems like it should smoke more. gonna block it off in the future, but dont want to burn it up while im researching best way to block it off.

Posted by: tgcheeseman

Cut lines under the right side that run to the pump. Then plug both lines on the pump side. Cut line at carb and plug it. Remove oil tank and your done. Mix 32:1 if you would like and run descent oil to save the life of your motor if you want to. Thanks I hope this helps.

Posted by: bloodswet&gears

thanks for the reply. i didnt see a line at the carb. this bike wasnt running when i got it. they had replaced the carb.. there was a small port between the carb and intake that was open. after i plugged that it started running better. i couldnt find what went to it so i plugged it. i dont have a manual or a diagram yet. i only see 1 line coming from the tank.