[need help tuning] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

need help tuning
(Click here to view the original thread with full colors/images)

Posted by: skidmarley420

I recently got a trinity racing 421 cheetah motor, stage 4 pipes, 35mm keihin carbs, v-force 3 reeds, air box has been eliminated, and i can't get it to run right. It lacks the low end snap and when I get into 4th gear and up it loads up and fouls plugs, it also seems like the left cylinder fires harder than the right. The quad is supposed to have 90hp and has no where near that. I would appreciate any help.

Posted by: DMC-4OOEX

I'm great with tuning banshee's, but not cubs.

Stop on over at hillclimbersforum (dot) com Lots of guys with cub motors and knowledgable people. I'm DMC-Banshee350 over there.

Posted by: hondamancbr03

Myself and most of my friends run cub motors....If you haven't found an answer let me know what your jetting is...We can start there first.

Posted by: skidmarley420

Thanks for the help. I'm pretty sure I got it figured out. just havn't had much time to work on it lately. been workin alot

Posted by: machwon

The last one I tuned run 148 mains, middle notch on a C series needle and 48 pilots I believe.

Posted by: hondamancbr03

quote:
Originally posted by machwon
The last one I tuned run 148 mains, middle notch on a C series needle and 48 pilots I believe.

That's pretty close to what i run when on the strip except i use D series needles.....My play bike i run 155 mains just to be safe.