[carb troubles?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs
Pages:1



carb troubles?

(Click here to view the original thread with full colors/images)



Posted by: m0t0xk1d

ok so i was at the track yesterday and i went over a jump and then my throttle wouold go like past 1/4 throttle it waslike it was jammed i punched it and it moved and it cept on doing this through out the day what could cuase this?

also when ever i went over whoops its seems it would start to bogg out a little(yes i was in the right gear) what could cuase this and what do i do

i have a 400ex carb and highly built motor



Posted by: born2ride14

Bogging- Jetting

Sticking- inspect the cable abd throttle housing take the slide out clean it, or better yet clean the whole carb, that may get rid of your bogging if it ran good with that jetting before.



Posted by: m0t0xk1d

yea its not the jetting the plug came out perfect but ill check that out



Posted by: dakota

mines doin the same thing with the sticking ive took it all apart and not sure wat it is did u ever figure out and in mine theres a pice brooke



Posted by: XBLASTERRACERX

I had the same problem it is when you have the gas tank on it kinks the throttle cable and causes it to stick open or cloesed and if it got stuck open thet could cause you to bog. I ended up getting an fcr carb but the way to fix it is to drain the gas and make a dent in the gas tank above the carburetor.



Posted by: dakota

ok the 4 wheller has a 400ex carb on it and i told every one that the tank is what was doin it cause it keep kinking thanks but im still goin buy a new 400ex carb but illdo that to tank thanks



Posted by: m0t0xk1d

my the bogging was fixed. still dont know how but it just stopped. never did anythin cept the main jet in it. i run a 172 main. but thats with a built motor and like pipe, filter 400 carb, porting, cam high comp piiston. the stuck throttle went any by spraying the ***** out of the carb springs with carb clean. take the plastic off and give all the springs a good spray and also spray the throttle springs and the slide. hasnt done it since





vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray