[i have a problem please any help] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

i have a problem please any help
(Click here to view the original thread with full colors/images)

Posted by: ranger505

i have a 2000 banshee i recently put a new top end 65.50 and it runs like crap it bogs and when i full throttle it it hesetates i originally had 230 jet so i someone told me to put a 270 in i did and it still runs the same the plugs are black black please any info i dont have the money to take it in for a tune up the only after market items on it are fmf gold pipes and a modqued head please help thanks....

Posted by: DMC-4OOEX

quote:
Originally posted by ranger505
i have a 2000 banshee i recently put a new top end 65.50 and it runs like crap it bogs and when i full throttle it it hesetates i originally had 230 jet so i someone told me to put a 270 in i did and it still runs the same the plugs are black black please any info i dont have the money to take it in for a tune up the only after market items on it are fmf gold pipes and a modqued head please help thanks....

Did you ever have the carbs apart for some reason? It sounds like your slides may be backwards in the carbs. That's what happened to me. I wasn't paying attention to what way they go in, and for WEEKS I was going crazy trying to figure out why it ran like ****. Ends up stupid me had the slides in the carbs backwards.

Posted by: ranger505

no they are right that is the first thing i checked

Posted by: DMC-4OOEX

quote:
Originally posted by ranger505
no they are right that is the first thing i checked

What are all your settings? Pilot/needle/main?

And are the carbs sync'd?

Posted by: ranger505

the carbs are sync the jets are 270 the needle is set in the middle i really dont know much about them thanks for the reply

Posted by: hondamancbr03

With stock air box you should be around 28 on the pilots, middle to one clip lower on the needle, and 270 on the mains should be close....But you could slowly drop the main and see how it runs.

What elevation do you live/ride at?

Posted by: ranger505

the elevation is 4,925 ft (1,501 m)

Posted by: hondamancbr03

A 270 main with pipes is a guage for sea level jetting...You will most likely end up with a lower number than that. Did you have the pipes on it when you ran the 230's before the rebuild?

Posted by: ranger505

yes it ran like a champ

Posted by: DMC-4OOEX

quote:
Originally posted by ranger505
yes it ran like a champ

Well then put them back in lol

Posted by: ranger505

the reason why i went bigger is because it is bogging out and not running good

Posted by: DMC-4OOEX

quote:
Originally posted by ranger505
the reason why i went bigger is because it is bogging out and not running good

If it's bogging out then it's too rich. Put the 230's back in, and try taking the air box lid off to lean it out and see if it makes a difference.