[convert typhoon for harescrambles] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

convert typhoon for harescrambles
(Click here to view the original thread with full colors/images)

Posted by: rap169

Need info on how to get more ground clearance out of my 2007 typhoon 125...wanna run it in some harescrambles but keeps bottoming out...any info for lifting it with suspension and A arms would help....will honda 300 ex parts fit? any suggestions appreciated...

also need set of tie rods, these have play...

Posted by: leager-n-ky

On the front, you can take your lower shock mount off, and have it welded on top of the a-arm, or buy some ASR arms, they are already done this way. I dont know about the rear, other than taller tires.

Posted by: double d 1

i had new bolt mounts made at a local machine shop cost me $20.00 i took a bolt out and showed them how long i wanted it and they tapped it out for the proper thread size. had a friend weld them on, cost a 12 pack. my son was bottoming out the front end now he doesnt any more. raised it about an inch. i have pics. on a early thread i think page 3 or 4. also the rear tires are small about an 11/2 inches small compared to a tire of the same size from another manufacturer. there is some early threads concerning this also.

Posted by: 91gtig60

get some larger tires and change the front[IMG]http://i59.photobucket.com/albums/g311/tdub785/DSCF0618.jpg[/IMG] [IMG]http://i59.photobucket.com/albums/g311/tdub785/DSCF0907-2.jpg[/IMG]

Posted by: rap169

cool. ill have to see if i can fab up some new shock mounts at work. what kind of nerfs are they. right now we are using the ac racing nerfs and they dont leave much room for any larger tire.