[width to 50" -- blaster] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

width to 50" -- blaster
(Click here to view the original thread with full colors/images)

Posted by: BakerRacing40

i've been doing a lil research on here and five pages in i'm still not sure.. lol
what i'm needing to know is how to get as close to 50" wide. what size a-arms and what size axle?
and what width do you get with different stock yamaha axles? yfz raptor banshee?
and what's the deal on 400ex hubs on yamaha axle?
thanks

Posted by: headache

+3 a arms with -2+3 front wheels would put you right about 50" wide in the front. A banshee axle with maybe a 1" per side spacer would also get you close to 50 with +5 rear wheels. I'm not sure bout the honda hubs but i have heard that 300ex hubs will fit the rear. 400 prob would too if the 300 will.

Posted by: mxblastermx

the g-force axle will with stock offset rims will bring you right to 50 inches,the 300 and 400 hubs work if you want to run a honda rear rim and they add about an inch and a half on each side, itheres also good used a arms on ebay that go for pretty cheap i got some snyder +3+1 long travels for 300, and g-force axles are 200 brand new, shocks you can always find on ebay.