[ims/roll peg info] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

ims/roll peg info
(Click here to view the original thread with full colors/images)

Posted by: croat1

thought you guys might like to know that roll design is in the process of making footpegs again. i talked to them on friday. the 88/89 style will be done in about three weeks (they are currently being cast). the 86/87 style will be done sometime after. the price will be 199 retail. forgot to ask if they will be flat or with the kick up.

Posted by: danhung11

I also found out the IMS Roll TRX450R pro stock series nerf bars bolt right up on my R.

Posted by: crf540r

will these be black powdercoat like the new style ones, or stainless like the old style?

Posted by: 250Renvy

Did they say they are bringing them back or is this a limited run?

Posted by: croat1

i did not get the specifics on the pegs. currently i have 2 brand new sets of unmounted pegs. the 86/87 are powdercoated gray with chrome. the 88/89 are black with chrome. both sets were purchased from white brothers in 2001.

i would asume that these are going to be a limited run. my best guess is maybe 50 sets. due to being a cast part

Posted by: danhung11

I called IMS Roll to get the specifics on this reproduction of the pegs. They currently have the 88/89's in production. They will be available in approximately two weeks. The 86/87 version will be shortly after. IMS will then evaluate the demand vs. supply. If there is enough demand, they will rerun another.

They do not offer the polished finish on their pegs anymore, they will be available in matte black finish and they are the kickup version. The cost is $199.00 a set.

Since I have received so many questions on the Nerf Bars, here is some pictures I took. I also shared with IMS that these particular IMS nerf bars for TRX450R bolt up with a tubular frame. Only thing needed would be a more "square" ubolt with two 90 degree angles rather than a "U" for the bolts and they should bolt right up to the R. At least they did on my Aren's stock replacement frame.

I took a couple pictures for you to see what I am talking about.

http://i223.photobucket.com/albums/dd228/danhung11/000_1514.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1515.jpg

http://i223.photobucket.com/albums/dd228/danhung11/000_1516.jpg

Posted by: Mony25

How far apart are the front tubes on the nerf from the peg mount. I have a roll quad that i am trying to get some nerfs for. I would really like to know if these will fit that frame as i would like to use roll nerfs since the frame is roll.

Posted by: danhung11

quote:
Originally posted by Mony25
How far apart are the front tubes on the nerf from the peg mount. I have a roll quad that i am trying to get some nerfs for. I would really like to know if these will fit that frame as i would like to use roll nerfs since the frame is roll.

The silver mounting bar slides and there is room for probably give or take 2" of adjustability. I wrote IMS an email explaining this. For OEM frames, it would only need a bolt with angles instead of "U", then it would hold flush against OEM R frames. It's easily doable.

If not, just sell them or return them. ATV Galaxy has better prices.

PART PRICE: $199.95
PART NUMBER: 702206

Good luck with your Build!

Posted by: 01shee

I wish they would make the heel guards again

Posted by: D Bergstrom

quote:
Originally posted by 01shee
I wish they would make the heel guards again

I am with you. I have no intrest in footpegs unless I can get heel gaurds to go with them. I wish they would make a footpeg/heel guard/nerf combo again. (Although it looks like danhung has the nerf thing figured out, just need the heel guards.)

Doug

Posted by: Mony25

For the roll frame the front nerfs mounts are integrated into the frame so i cant use the center bar that bolts to the frame with u bolts. Thats why i needed the measurments lol. So if you could do that i would really appreciate it.

Posted by: danhung11

quote:
Originally posted by Mony25
How far apart are the front tubes on the nerf from the peg mount. I have a roll quad that i am trying to get some nerfs for. I would really like to know if these will fit that frame as i would like to use roll nerfs since the frame is roll.

The center of horizontal tube to contact with ims peg is exactly 15".

If you look close, there is actually three holes to mount to either stock or aftermarket pegs. As an fyi, these best fitting nerfbars I have ever owned. That's not saying much since I have only had AC Racing Nerfbars on my past quads.

Let me know if you need more measurements.

Dan

Posted by: Mony25

OK thanks for the measurments i will check tomorrow to see if they will work.

Posted by: 250Renvy

Any news on these?

Posted by: danhung11

quote:
Originally posted by 250Renvy
Any news on these?

???

Posted by: All250R

called thr or fri last week I think and they are in manufacturing, but no estimated date yet...

Posted by: croat1

i talked to them about a week ago. they said another 2 weeks or so. the person i talked to said to keep a watch on their website.
they did take my name and address down. they would contact me when they came in. basically a waiting list.

would suggest that you call and get on the list.

Posted by: croat1

rec'd a call from roll design today. the 88/89 pegs are going to the powdercoater this friday. they are planning on shipping the with ups next tues/wed.

they only made 15 sets. about half are already spoken for . the cost is $239

Posted by: SilverLake250R

I got a call today......239 is a lot but i had to do it! I can't wait to try them out.

Posted by: Chepiriux

Men I just order a set!!! They will arrived next week!!! Does anybody Know if any roll heelguars for any other bike will bolt to the 250r frame? if they dont has any body modified them to make them fit ?

Posted by: All250R

quote:
Originally posted by SilverLake250R
I got a call today......239 is a lot but i had to do it! I can't wait to try them out.

If anyone wants a better deal on these Roll pegs. PM me.

Posted by: SilverLake250R

Put mine on today! They are awesome! Now I just need my crank to come so I can put my motor back together...

Posted by: ehorst33

can anyone send me some pics of theirs im looking at getting a pair and wanna see what they actually look like. also they will fit an 86 stocker wont they?

Posted by: croat1

no they will not fit a 86. roll made the 88/89's first. the 86/87 footpegs will be made soon.

Posted by: All250R

The 86-7 models are in production though. They'll be out soon enough.

Posted by: twopump78

will the pegs fit a 01 roll design lobo frame? if so what year?

Posted by: Master LTR450

quote:
Originally posted by twopump78
will the pegs fit a 01 roll design lobo frame? if so what year?

Yes they fit on the roll design frame and u will need the 88-89 setup.

Posted by: croat1

UPDATE:roll design had manufacturing problems getting the 86/87 heal guards made. basically we are out of luck. a roll design rep told me that they lost interest in getting the 86/87 style pegs made. we need to call them up and voice our opinions/needs.

i have original first run ims pegs and ims heels guards that might be for sale. NIB from 03 taking offers. these were mounted just for test purposes. i can email pics

i will have my own designed heel guards that will bolt onto either stock or ims pegs for sale by the end of the year(email for details)

email me if interested (for details)
joseph.ivanac@tt.net

Posted by: 1promodfan

How about some pegs for the '89 model??

Posted by: croat1

contact ALL250R. he has the best prices on the 88/89 ims pegs.
send him a pm

Posted by: All250R

Roll wants 239 for the pegs because they did a smallish run so they're more than they normally should be... I can get them out for a good amount less though. They have told me they're going to place another order for the 88-9 so that's good news. My feeling is that if the 88-9 were selling better, they would push harder on the 86-7, but they haven't been moving very fast. I tried to advertise on ebay, but didn't have as much interest as I expected. The best way to keep parts in the market is if people are buying them.

It's really cool that Roll decided to go through the trouble to find a fabricator to make TRX pegs again. If only Honda would do the same. You don't have to buy them from me, but if you think people would want them, get the word out that they're back in the market and get them to place the order to Roll.

Posted by: IcutMetl

This is probably old news to you guys, but I'm looking at Chapparral catalog #83, and those pegs are offered on page 230.

Posted by: All250R

Ok, Paige at Roll as said they would be interested in overcoming their tooling issues for the 86-7 pegs if they got enough orders. I placed a poll in my site if you're interested in weighing in on a pre-order list. If enough people want them, cool, if not, none will be made. I don't want to create a link because I don't want to offend the exriders owners. That's all I can think of to do for the effort.