[Help with a few questions] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Help with a few questions
(Click here to view the original thread with full colors/images)

Posted by: 06 Honda 450R

my brother bought a xx and he wants to change the wheels to regular sizes, what size would i need, what size of itp bajas would i need, and what kind of tires are good for all around, trails, fields, gravel, i was thinking razrs or what, also he will be wanting exhaust and a programmer, will he need a programer, if he does what kind should i get and what kind of exhaust should he get, thanks guys, i rode this beast and its amazing...

Posted by: 06 Honda 450R

also, what skid plates should he get,

Posted by: stoopidbot

Unless he goes with a pretty big offset he needs 11" rims for the back. They are needed to clear all the junk in the trunk.

Posted by: sprayedgt

Not sure of the size, but he'll have to check to see what fits it properly. IMO nothing looks worse than wheels on a ATV with a stupid not model specific offset. As far as exhaust one word YOSHIMURA! I have a yoshi on both Honda's and 2 street bikes and they are great. You will not find better quality anywhere. Skid plates just stay away from the cheap Chinese made Pro Armor and you'll be fine.

Posted by: stoopidbot

2 brothers makes an amazing exhaust system for the XX

Posted by: ceballos400

IMO..... Razr2s, stock offset on the wheels... OMF makes some sick ones... HMF on the exhaust with a PCIII or PCV programmer... and nothing beats PRM on skids

Posted by: 5W0P3

RZR2's for tires, but you can't get them in an 11" wheel. You can get them in a 10" wheel but make sure you have the right offset.

Yoshimura on the exhaust! Two Brothers are too loud for me.

Posted by: ceballos400

you CAN get the razr for the rear.... call maxxis and find a dealer nearest you.... matlock runs them...

Posted by: 5W0P3

quote:
Originally posted by ceballos400
you CAN get the razr for the rear.... call maxxis and find a dealer nearest you.... matlock runs them...

RZR's yes. Not RZR2's.

Posted by: stoopidbot

quote:
Originally posted by ceballos400
you CAN get the razr for the rear.... call maxxis and find a dealer nearest you.... matlock runs them...

Just cause Wayne runs them doesn't mean they are available to the public. Unless they finally released them.

Posted by: 5W0P3

quote:
Originally posted by stoopidbot
Just cause Wayne runs them doesn't mean they are available to the public. Unless they finally released them.

The regular RZRs are released, but go out of stock pretty quick.

Posted by: stoopidbot

I stand corrected. The Rzr is available in 11" rim.

Posted by: 06 Honda 450R

also, those of you who have the 10x8 wheels, what kind of wheels do you have

Posted by: scuzz

ITP's from Rocky Mountain ATV.

BE WARNED THOUGH

ITP's seem to bend really easy (check the feedback section of rocky mountain atv...and you'll see.

Anyway, the ones I have I put paddle tires on for the dunes. The clearance with these rims between the rim and the a-arm is 1/4 of an inch. So if you bend them the will contact the a-arm.

See:

http://i82.photobucket.com/albums/j254/gwwaddle/TRX700XX/100_9266.jpg

Posted by: 06 Honda 450R

so yours are itps, i couldnt find any 4/144s on parts unlimited but feedback would be nice, where did you get your rims

Posted by: scuzz

quote:
Originally posted by 06 Honda 450R
so yours are itps, i couldnt find any 4/144s on parts unlimited but feedback would be nice, where did you get your rims

Rocky Mountain ATV

Posted by: 06 Honda 450R

how much did you get them for btw thanks

Posted by: scuzz

Here's what I ordered:

DO NOT GET THE SAND SNAKES, THEY WERE GARBAGE.

20x11x10 Sand Snake on ITP .190 T-9 Pro Series Polished - 2008 Honda TRX 700XX (1 item(s) Gift Wrapped) Part# 1090270011 258.80 1 $258.80
…AMS Sand Snake 20x11x10 (2 per pkg.) 2
…4/144 ITP .190 T-9 Pro Series Wheel 10X7 4.0 + 3.0 Polished (2 per pkg.) 2