[Big problem-400 ex] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Big problem-400 ex
(Click here to view the original thread with full colors/images)

Posted by: seeking_help

I'm working on a 400ex for a friend and I have run into a bit of a snag.This is hard to explain so please bare with me. His brake pedal was frozen to the frame on his 2007 400ex (thanks honda) It snapped off in the frame (your welcome) so I resorted to having it drilled out (which was fun). My problem is that the brake pedal has a allen bolt through the center of it and it bolts to a curved plate on the back of the pedal (which attaches to the rear brake light actuator) but the allen bolt has nothing to tighten against on the front side of the pedal itself. So the allen bolt will fall straight through the brake pedal. It seems as if the pedal should have a lip on it to catch the allen side of the bolt, and the bolt goes through the pedal into the curved plate. So it will go through the provided hole as it should but it has nothing to tighten against. If anyone has experience with this pedal set up please let me know because im at a loss

Posted by: seeking_help

Here are pics to go along

http://img168.imageshack.us/img168/4629/brakepedal003.th.jpg
http://img168.imageshack.us/img168/459/brakepedal004.th.jpg

Posted by: v0lcom13sn0w

buy a new one or go to the parts for sale section and look at the partouts and pick one up for cheap