[hipers??????] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

hipers??????
(Click here to view the original thread with full colors/images)

Posted by: 450Rfutureracer

Well I have a set of hiper wheels all around for my 450r but I sold it and now they dont fit the new 525. The ones for the back have the same bolt pattern but seem to have too small of a hole. So I am looking to see what everyone else is doing about this. Just wondering what everyone is running for the hipers. I still don't know what offset the stock rims are either. The ones i have are honda 4+5 in the rear and 3+2 in the front. Also I was wondering if anyone is running the rath front hubs to change from ktm to honda. Are they hard to do? Thanks for looking.

Posted by: holeshot19

just get u a set of cf1s i bought a new set of 4 for $460 shipped, the front is 4+1 offset and the rear is 3+6 offset, those hiper tc3 dual rear beadlocks makes the rear too narrow if u run those u need to space out the rear axle the stock spacer makes it too wide u can get a mechine shop to cut the stock spacer but as far as the front hubs i would replace the wheels first

Posted by: holeshot19

my bike

Posted by: JM317

I run 4+1 fronts and 4+5 rears with the axle spaced out. You might need use a round file on the bolt holes to get them to fit. As far as the fronts, you can buy the Yamaha pattern centers and replace your Honda centers.

Posted by: quad97

I had to drill the inserts out one size bigger on my hipers for them to fit on the rear. The hole pattern is correct, but the hole size is not.

Posted by: flash

I run 4+5 offset hipers, cut the spacer myself. I put it in vise and used a hacksaw, looks like factory job, pretty simple.