[Rims from other atv fit trailblazer?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Rims from other atv fit trailblazer?
(Click here to view the original thread with full colors/images)

Posted by: norcalatver

Will rims from other manufacturers fit a Polaris Trailblazer. I'd like to put aluminum rims on my son's 250, but don't want to buy new if I don't have to. Thanks!

Posted by: GE4x4

There isn't unless it's a scrambler. But if you can find some used rear Predator hubs in the 4/110 (04 or newer), then you have all the choices except Yamaha.

Posted by: bossman525

quote:
Originally posted by norcalatver
Will rims from other manufacturers fit a Polaris Trailblazer. I'd like to put aluminum rims on my son's 250, but don't want to buy new if I don't have to. Thanks!

i have some aluminum rear rims for a scrambler 400, should be the same as the trailblazer.

Posted by: rundrave

the Trailblazer is 4/4 bolt pattern in the rear, and 4/156 up front.

You can use any of the hubs off a predator but keep in mind the 03 was a 4/156 rear everything is 4/110 as mentioned above.

The pred hubs will also require a little grinding off the back face of the hub to fit on the axle enough to get the castle nut and cotter key on.

Posted by: norcalatver

Thanks for the replies. My son's 250 is a 2003, so that means I have to buy rims specially for it? Thanks again!

Posted by: exracer416

i put predator hubs on my scrambler all i did was grind the castle nut down where the cotter pin goes through. then you can run a honda bolt pattern rim.

Posted by: rundrave

quote:
Originally posted by norcalatver
My son's 250 is a 2003, so that means I have to buy rims specially for it?

no you dont....just swap the rear hubs from any year pred then buy wheels that fit that bolt patter

your bolt pattern in stock form on the Trailblazer for ALL YEARS is:
4/4 REAR
4/156 FRONT

The predators bolt patterns:
2003
4/156 REAR
4/156 FRONT

2004+
4/110 REAR
4/156 FRONT

you can get just about any wheel out there in a 4/156 or 4/110 bolt pattern. Your not going to find much that will fit a 4/4.