[removing stock bearing barrier?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

removing stock bearing barrier?
(Click here to view the original thread with full colors/images)

Posted by: 03400EX_Nacs

i accidentally sold a 06 and up yfz 450 carrier on ebay to a guy needing a 2004-2005 carrier. to resolve this issue he is returning the carrier. i have a stock swingarm with the carrier still in it. used of course, he said he would take that instead. but how do i remove it?

Posted by: Ride1Rob

There are two long screws that go through the swingearm. This bolts the carrier in the swingarm. The nuts for these long screws are on the right side of the swingarm. Take the nuts off and the swingarm should slide out through the right side. The left side will seperate once those screws are removed. You may want to check those bearings and make sure they're not seized or damaged.

Posted by: #17YFZRACER

if its never been apart and its an 05 chances are the bearings are pretty rough