[CR Ignition on 250R] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

CR Ignition on 250R
(Click here to view the original thread with full colors/images)

Posted by: 250r__Ice

I know you can put a CR250 ignition on a 250R, and everybody says 2001 is the best year. Shops like ESR sale the complete kit or you can go to E-BAY or were ever and pick it up seperate . My question is, I have seen in books like Dennis Kirk where you can buy a lighting stator for a CR250 so you can run lights. Will this work with the kits like you get from ESR and other shops. I thought I saw a post somewhere that said it would not work because of the special backing plate that you have to use with these kits. Any info would be great.
Thanks

Posted by: TheNewn

I'm fairly sure i read somewhere that people got it to work (cr ignition with lights) without a whole lot of trouble. I'm curious myself because i'd like to look into doing it as well. I'll try and find it again.

Posted by: TheNewn

Here are a couple search answers that may point in the right direction

http://www.exriders.com/vbb/showthr...ignition+lights

From the searches i've done, it would appear that its too much hassle to get lights on a CR ignition. And if you do get a coil its only like 50 watts (apparently stock is around 100 ish)

Just get a Dyna ignition with a lighter flywheel i guess