[swingarm bolt] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

swingarm bolt
(Click here to view the original thread with full colors/images)

Posted by: PeanutButta

250r is pissin me off so much. stupid swingarm bolt doesnt come out! ive been hittin it for about 3 hours straight tryin every different thing possible. it came out maybe 1 1/2 to maybe 2 in. and doesnt budge after that. any suggestions before i burn the piece of **** ahha

Posted by: j28d

Take a head stud off a mojave/z400/warrior or a fat punch and use it to beat the swingarm bolt through. Turn the frame on it's side, find a junk rim and put the frame on top so the bolt has room to go, soak the bolt with wd 40, and beat it with a 5 pound sledge. If that doesn't work, carefully sawzall the the sides closest to the frame first, stand the bike on the front with the linkage disconnected so the swingarm will swing down, and carefully sawzall the sides inside the motor. Use a brand new metal blade and take your time.

Posted by: troybilt

Check this thread:

http://www.exriders.com/vbb/showthr...threadid=347282