[Scrambler 400 splines] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Scrambler 400 splines
(Click here to view the original thread with full colors/images)

Posted by: kargaaro

Does anyone know if the splines for the rear hubs are the same on all polaris quads? I would like to use predator hubs on my 2000 Scrambler 400 4X4 to change the bolt pattern.

Posted by: rundrave

yes the predator hubs will swap over, but they will take a little bit of grinding to fit perfect. You have to grind some off the back of the hub so you can get the castle nuts on with the cotter key.

the 03 pred had 4/156 bolt pattern (same as the scrambler fronts)

and 04 and higher had 4/110 bolt pattern

i have the 03 pred hubs on my 04 scrambler so I could get some better wheels because there are not many aftermarket wheels that fit the stock 4/4 pattern on the scramblers

you should come check out www.gen3usa.com that website is all about scramblers, trailblazers and 400 sports

Posted by: kargaaro

Great news. Thanks for the help. I have stacks of honda wheels and tires around here and would like to put a set on it. Looks like I'll need 04 or newer predator hubs and they should swap right over.

Posted by: kargaaro

Well apparently they're hard to find. You don't know if honda hubs will fit do you?

Posted by: rundrave

yeah i had to look for a bit before I found some. I actually found some on this site. You could also check the predatorowners or ebay.

I got mine for really cheap, just have to do some looking.