[throtle sticking help!!!] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

throtle sticking help!!!
(Click here to view the original thread with full colors/images)

Posted by: Murzyn101

Hey I have a 06 kxf250 and my buddy took a spill on it and since then the throtle has been sticking. How can I fix this, so far the only advise I got is to put wd40 on the throtle cable. Any know anything i can do to fix this?

Posted by: embler

check the cable carefully. it may have gotten kinked up. one little kink is all it takes for it to stick. I'd take it off from the throttle and from carb. it should push in and out easily. if not, get a new cable. mine was $17 for my warrior, so they aren't very expensive, especially compared to hospital or repair bills when it sticks wide open with you on the trail. imo, wd-40 isn't a good thing to use as its a degreaser. get some cable lube or graphite for it.

Posted by: yfzrider310

take out the carb and check the slide. I took mine out of the old blaster and it had mud on it. So I wiped it down and put some oil on it and now it works awesome.

Posted by: 400ex28

Check the carb and also make sure the cable works freely.