[so my first time right] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

so my first time right
(Click here to view the original thread with full colors/images)

Posted by: Jnblaster05

well this is gonna be my first time takin off my stock axle and putting on a lonestar +2 axle is there any special tools i need or anything weird to expect any help would be much appreciated

Posted by: buster024

Glad you asked this....I'm doing the same thing in a few weeks once mine get's here. I've seen a special press tool on RMAC, but I'm not sure what is being pressed.

Posted by: Jnblaster05

exactly i seen that to and thought whats goin on maybe somethin im not getting

Posted by: foxracer5464

its not to bad it helps if u have a buddy there to help out but you take your tires and hubs off then your brake caliper and rotor then get to big monkey wrenches us one to hole one side of the locknut still and the other to losen and tighen it then turn the nut toward the bearing carrier i beleive to reviel the c clip thing work that off either with a couple of small flat head screwdrivers or use the pliers desighned for the job then i think you have to spin the nut back the other way a lil then take a ruber mallet on hit the tip of the axle were the hub went on (on the left hand side from looking at the quad from behind) untill it pops out then vise versa
if i missed somethin fill me in

Posted by: Jnblaster05

sweet thanks man