[Rath hubs MX] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Rath hubs MX
(Click here to view the original thread with full colors/images)

Posted by: ktmbill

Just put on the RAth hubs but it measures 50.5". Has any buddy had the same problem.

Posted by: patrickj75

i have some but haven't put them on. Daryl said he was going to make a spacer kit so you could fine tune the width more. i'll let him know about the width problem.

Posted by: ktmbill

Thanks Patrickj75
All so the taper at the back of the hubs are not right they are to small in the ID or they are not chamfered deep enough.

Posted by: ktmbill

OK fixed cut the tapper in the back of the hub to the right depth used a 1" spacer cut tapper to fit the axle measures 49 7/8".
Patrickj75 if you set the washer with the tapper on the back of the hub you will see if the tapper is deep enough.