[Carrier & Axle problems] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Carrier & Axle problems
(Click here to view the original thread with full colors/images)

Posted by: NikNacs67

I bought an East Coast ATV carrier and a g force axle. Went to install it and the sprocket rubs on the carrier and the carrier will not spin with the c clip on by the brake stay. Once the c clip is off, the carrier will spin. Anyone have any suggestions?

Posted by: TRX450R_Racer

What do you mean the carrier won't spin?

Posted by: jpfmotors

i bought the same carrier but have a stock axle i had a problem with sproket holder hitting the carrier just a little so i just ground it down just a little barley anything had to be ground. the edge of the carrier is made a lot thicker. once the soroket holder was ground a little then i could tighten the axle and adjust it properly. that was the problem that i had if it helps

Posted by: d3ktrix

Ya I had that problem with I installed a Gibson carrier in my friends 06 with a gforce axle.
Just had to file a little bit off the outer lip of the carrier.

I didn't have this problem with my RPM axle.

Its all about the shape of the sprocket hub for that axle.