[rear sprockets] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

rear sprockets
(Click here to view the original thread with full colors/images)

Posted by: whc

where can I get 40 41 or 42 teeht rear spockets?? would like 1st gear to be a touch lower, currently 14/39. I do not want to use a 13 front. chain would be rubbing on swing arm and would probaly be geared too low. any help is a pre she ate ted. thanks Mild Bill

Posted by: frenimy

Most any aftermarket stores should carry what you are looking for but you can try chaparral-racing.com rockymountainatv.com

Posted by: 440exadee

i got my 41 and 43 from sprocketspecialists.com

Posted by: JOEX

Atvriders.com site sponsor C&D Racing

Posted by: TRXRacer1

I'm running a 13 front with no problematic rubbing on the swingarm.

Posted by: wcbomb

if you are thinking about the bigger rear 42 tooth sprocket it will probably rub the rear skid, could use washers to shim it away from the swingarm, 3 teeth up on rear equals 1 down on the front.

Posted by: drew416ex

I thought it was 2 on the rear equals 1 up front

Posted by: Gatekeeper

Just bought a new front. 1 down in the front=approx 3 up in rear
38/15=2.533 stock
38/14=2.714 down 1 frt
41/15=2.733 up 3 rear

Posted by: 400funex

I have a 41t (13t front too) and I love it. I mostly ride in the sand so the low gearing is nice to have. I got mine because I wanted to try and close the gap between 2nd and 3rd, it helps a little. As far as top speed my GPS tells me I can do 53.5 mph with this set up.