[where 2 get replacement o-rings for PC2000 coolhead] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

where 2 get replacement o-rings for PC2000 coolhead
(Click here to view the original thread with full colors/images)

Posted by: CorvetteZ06

hey guys, is there any place where I can get replacement O-rings for my cool head on my PC2000 top end? Is Duncan the only place? Or does a place like Napa have them? ALso, part numbers for both of the o-rings would be great. Thanx guys!

Posted by: 312R1

For the dome or the head itself? You can get them from Duncan and Baldwin.

The one that I sent with it was brandnew...something wrong?

-Steve

Posted by: CorvetteZ06

hey steve, i must have misplaced them..... is that the only place to get them? also, when installing them, how do you get them to stay in the head when installing back on the jug, a little bit of grease?

Posted by: 312R1

That sucks..

As far as I know those are the only places to get them. You shouldn't need anything to keep them in place.

-Steve

Posted by: C-LEIGH RACING

Steve,
You ever put a Pro-x o ring set beside a set for the PC2000, wonder how close to matching up they would be.
Theres a bearing supply place near me that carrys the red high temp o rings.
I checked with them one time when I was in a tight & needed a set real quick for a Pro-x cylinder, just happened to be out of that size to fit a 330, just my luck I guess.
Name of that company here is, Motion Industries Inc & they have over 600 locations in the USA.
Company name is the same at all 600.
Neil

Posted by: Aceman

quote:
Originally posted by C-LEIGH RACING
Theres a bearing supply place near me that carrys the red high temp o rings.
I checked with them one time when I was in a tight & needed a set real quick for a Pro-x cylinder, just happened to be out of that size to fit a 330, just my luck I guess.
Name of that company here is, Motion Industries Inc & they have over 600 locations in the USA.
Neil

Motion Industries, huh? I bought my counterbalancer bearing from them on my last rebuild over here in WA state, didn't know they carried high temp o-rings...

Posted by: C-LEIGH RACING

quote:
Originally posted by Aceman
Motion Industries, huh? I bought my counterbalancer bearing from them on my last rebuild over here in WA state, didn't know they carried high temp o-rings...

Well, I just try to help when I can.
Neil

Posted by: 312R1

quote:
Originally posted by C-LEIGH RACING
Steve,
You ever put a Pro-x o ring set beside a set for the PC2000, wonder how close to matching up they would be.
Theres a bearing supply place near me that carrys the red high temp o rings.
I checked with them one time when I was in a tight & needed a set real quick for a Pro-x cylinder, just happened to be out of that size to fit a 330, just my luck I guess.
Name of that company here is, Motion Industries Inc & they have over 600 locations in the USA.
Company name is the same at all 600.
Neil

I sure haven't, good info. Makes me wonder how close they are. Hmm

Posted by: 86 Quad R

yessir! even lil ole stixville ms has a motion industries. gotta luv em

Posted by: CorvetteZ06

i just called up Duncan and ordered them, $20! for 2 stinkin O-rings, and then $14 to ship to NJ?! $34 is rediculous for 2 o-rings, there must be a part number on these or some other place to get them for a quarter the price, like at Napa or something. I know when I change the oil filter in My Power stroke diesel it uses High temp o-rings to seal, like 3 of them, and they are no where near that price.

Posted by: 312R1

quote:
Originally posted by CorvetteZ06
i just called up Duncan and ordered them, $20! for 2 stinkin O-rings, and then $14 to ship to NJ?! $34 is rediculous for 2 o-rings, there must be a part number on these or some other place to get them for a quarter the price, like at Napa or something. I know when I change the oil filter in My Power stroke diesel it uses High temp o-rings to seal, like 3 of them, and they are no where near that price.

Did you try Baldwin..There located in Ohio. If you did I wish you would have told me that you were going to order from Duncan..I could have helped you out.

-Steve

Posted by: my88r

quote:
Originally posted by CorvetteZ06
i just called up Duncan and ordered them, $20! for 2 stinkin O-rings, and then $14 to ship to NJ?! $34 is rediculous for 2 o-rings,

sounds like duncan.

Posted by: Aceman

I would of told them to stick them in an envelope and send it USPS...shipping total=$1.

Posted by: gandgracing

I bought mine at Motion Ind. for around $10. 6 orings- 3 sets are black in color and have had no problems

Posted by: CorvetteZ06

gandgracing-- did you get them specifically for the pc2000 head? do you recall the part number? Thanx!

Posted by: gandgracing

I'll see if the bags have the #'s on them. And yes they are being used on a PC 2000 340cc powervalve. Couldn't let myself spend $20 on 1 set of o'rings

Posted by: CorvetteZ06

quote:
Originally posted by gandgracing
I'll see if the bags have the #'s on them. And yes they are being used on a PC 2000 340cc powervalve. Couldn't let myself spend $20 on 1 set of o'rings

ok, great, its much apreciated!

Posted by: C-LEIGH RACING

$20.00 dont sound that bad I guess.
The 3 piece Pro-x set is $23.95, 2 for the head & one for the dome around the plug.
Neil

Posted by: ct350trx

I ordered a top end gasketkit from ct-racing for a 350 kit. $31,72

Posted by: gandgracing

Forgot all about getting part #'s, but I just took in my old set and they matched them up.

Posted by: CorvetteZ06

quote:
Originally posted by gandgracing
Forgot all about getting part #'s, but I just took in my old set and they matched them up.

yeah. there are 2 motion industries next to me, i will take the o-rings to them and have them match them. Thanx for the help everyone.