[Houser +2 stem] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Houser +2 stem
(Click here to view the original thread with full colors/images)

Posted by: 450Rchaser

Ok, I put my +2 stem on my 450 last night w/ Flexx Bars. Which dont have much rise from the clamps to the actual bar end.

Here's my problem, all my cables and wires are stretched pretty tight while turning. I have tried to get all the slack out of them that I can. I have everything on the bars and nothing is wrong w/ the routing but the wires are to tight for my liking when i turn sharp.

Any suggestions?

Other than get a +1 stem : )

Posted by: quad_racer_17

i have the same problem but all i need to do is to get a longer brake line

Posted by: 450Rchaser

I have steel braided brake lines. They are always longer than you need.

Posted by: jherbie28

you need to get a set of streamline +2 lines, brake, clutch, and throttle. i had a +0 stem on my kfx and my lines were to long. you can ask houser to switch it out as long as it looks new. i have a set of dana creech bend flex bars, and a set of protaper bar risers on a stock stem and it feels like its a +2 stem. good luck