[Carb help for Banshee please?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Carb help for Banshee please?
(Click here to view the original thread with full colors/images)

Posted by: vrand

Anyone have any helpful tunnig help for two carb setup w/o the URS box. Mildly built, Pro circuit pipes. Or anyone have a one carb setup for sale? Know where to get a new one but 400.00.

Posted by: Washburn

Just look at your plugs, you can also do plus chops to be dead on. If the center electrod is nice and tan the jetting is on. If its too dark your rich. Lite brown with hints of white your too lean. Other than that you can pretty much feel for any dead/boggy spots on idel to 1/4 needels 1/4 to 1/2 piolet and 1/2 to WOT Main jets.

400.00 for a brand new 2:1 setup is a good deal. I got my trinity intake with a 35PWK S/S Throttle cable and airbox adaptor plate for almost 400.00 used.

Posted by: machwon

For stock carbs and the pipe you have I would run the aftermarket jet needles, stock pilot and 280 mains. If you a mildy ported motor you will be somewhere in the 340's with the main jets, 370's if you have a full port job. Hope this helps you out.

Posted by: 2stroketwin

If your interested I have a Trinity single carb set up with a 33 Keihin and aftermarket reeds for $350 shipped. Try a Banshee website for your jetting help.

Posted by: New450r

If he dosent want it my friend might. He is wanting a 2-1 set up.