[Lonestar Racing a-arms] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Lonestar Racing a-arms
(Click here to view the original thread with full colors/images)

Posted by: eddie pettengil

can someone post a pic of Lonestar Racing a-arms around the spindal- ball joint area. not sure if the lock nut for the ball joint goes inside or outside the arm. Mine are +3 arms, standard travel.

Posted by: pimpt250r

upper or lower arm

Posted by: eddie pettengil

not sure on both, i would think they would be the same.

my ball joints screw into the arms, I thought they would not screw in but have a lock nut on both sides so you can adjust camber without having to remove the ball joint from the spindal to screw in or out. I bought them brand new and they came with ball joints and tie rods so i'm guessing its the right set.

Posted by: Rich250RRacer

Lock nut goes on the outside of the arm. The only way to adjust them is to separate the ball joint from the spindle.

Posted by: eddie pettengil

thanks for the reply

Posted by: havinnoj

here's a pic. they are not the same on my +2/+1's

nuts on uppers are on the outside.

nuts on lowers are on inside.

http://img338.imageshack.us/img338/661/ssale003fo3.th.jpg