[alot of aftermartket parts] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVsPages:1
alot of aftermartket parts
(Click here to view the original thread with full colors/images)
Posted by: Honda250XRacer
300ex/250x Part Out !
FOR SALE
The engine parts have about 1 hr of riding on them
TAKING OFFERS !
HMF w/ White brothers header- $290 plus shipping
4stroke tech cam $150
kibble white valve springs $90
versah valves $85
400ex carb $75
cylinder bored .80 $90
wiseco .80 12:1 piston $70
AC nerfbars with black nets $110
AC bumper no dirtscreen $45
black maier racing plastic $100 plus shipping
front stock gray 87 250X plastic $100 plus shipping
stock rear black plastic with red seat $125 plus shipping
lonestar axle $250
lonestar twin row bearing carrier $55
renthal bars $40
STOCK PARTS
frame 87 250x
polished side cases - 87 250X
kickstart lever
gas tank
thumb throttle
throttle cable
new clutch cable
swing arm
footpegs
brake lines
stock shocks fronts and rears
2 air boots air-box to carb
3 air boots carb to head
a-arms bottom 300ex
bottom-end of motor
steering stem
wiring harness
stock honda front and rear rims with tires
front & 2 rear brake calipers
4 axle hubs front with rotors
front spindles
swing arm skid plate
shock covers
maybe some other stuff i cant think of.
Posted by: Honda250XRacer
EVERYTHING IS C L E A N
Posted by: Honda250XRacer
pipe
Posted by: Honda250XRacer
maier and stock plastic
Posted by: Honda250XRacer
cam basically brand new ...bought in march ..installed in june and taken out after about 45 mins of riding .
Posted by: Honda250XRacer
axle
Posted by: TRX-330
can i ask what you cleaned ur engine with, its supper clean and cant figure out how to get mine that clean.
and how do you like the pipe setup, with the white bros header and hmf slip on.
Posted by: Honda250XRacer
just put some aluminum acid on it which ate all the paint off and made it all really dull and then i had to buff everything out.
the pipe is sweet id say it the best money can buy.
Posted by: TRX-330
if i had 290 id buy that pipe in a heart beat.
Posted by: honda8&3
Got a picture of the nerf bars?
Posted by: Honda250XRacer
...
Posted by: RoadRidin450r
What kind of carrier does it have and are the bearings good in it? If so how much for that?
Posted by: Honda250XRacer
LONESTAR TWIN ROW CARRIER , THE BEARINGS ARE FINE 60dollars shipped.
Posted by: RoadRidin450r
Hmm how old is it and do you have any pictures?
Posted by: Honda250XRacer
bought it last summer this is what it looks like
Posted by: Honda250XRacer
.....
Posted by: honda8&3
Is it a billet carrier?
Posted by: Honda250XRacer
cast
Posted by: RoadRidin450r
Will the carrier work with my stock axle? Also how do you take money becuase I need new bearings but this is about the same price and easier to install then new bearings.
Posted by: honda8&3
Yes it will fit
Posted by: pimpin330ex
hey trevor how much did you want for just the front maier race cuts plastics shipped to my house
Posted by: Honda250XRacer
still have everything .....would like to sell soon..
thanks
Posted by: JIMFROMTEXCO
rear plastic, carrier, complete rear brake system, and grab bar? how much to 16411. (erie pa)
what do you have for bars?
Posted by: TRX-330
would you take 200 plus shipping for the axle?
Posted by: Honda250XRacer
pm'ed ya guys
Posted by: sadinkins
do you have the head? if so is it ported and are the valves stock or bigger? what would you take for the whole top end (cylinder,piston,head)?
Posted by: Honda250XRacer
no head.... the cylinder is .80 and the piston is an .80 over with 12:1 compression
Posted by: Honda250XRacer
piston
Posted by: enduro400rider
how much for a rear caliper?
Posted by: Honda250XRacer
$55
Posted by: TRX-330
Did you sell the carrier yet?
Posted by: Honda250XRacer
nope sure havent..
thanks, Trent
Posted by: TRX-330
How much shipped to 44473?
Posted by: glove man
Do you still have parts. Nerfs, bumper, handlebars?
Posted by: Caseys 300ex
How much for the piston and cylinder?
Posted by: Honda250XRacer
id like 165 shipped.
Posted by: panther99
what would it take to get a kick start to work on an '01 stock 300??
Posted by: panther99
And, how much for the kick starter if it would work on my stock 300?
Posted by: Honda250XRacer
no it is not going to work.
Posted by: 1deadpresident
Seat available? How much for stock seat shipped to 37031? Don't need fender...
vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray
