[250R to YZF hybrid] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

250R to YZF hybrid
(Click here to view the original thread with full colors/images)

Posted by: higdageese44

Alright heres the deal, I have an 86 R pretty much built to the tilt of how I want it, now my question is how hard is it too be able to fit a yzf motor into it. Also I have my chance to get my hands on a yzf400 yes i know its 400, 1999, but I can get it for extremely cheap and then build it up to a 450 etc. So I ask how hard fitting the motor in the R and fabbing up mounts is and also does the 400 have the same mounts as 426,450 in case I decide on different motors at some point in time. Thanks

Posted by: racerx573

Read my post here...

http://www.exriders.com/vbb/showthr...ighlight=laeger

Posted by: Groves187

the YZ400F and YZ426F are only about 2 HP different. So the 400 wont be much different. I am running a 400 and love it.

Posted by: higdageese44

Alright thanks, just curious how much work was it cutting into the frame to make it fit, could you provide me with any tips? Thanks

Posted by: 250Renvy

What kind of frame are you running?

Stock? or Aftermarket?

Your best bet would be to buy the one on ebay that is already made for that motor.

If yours is stock frame it would be way better to use an aftermarket frame because of the extra weight

Posted by: higdageese44

Yeah i'm running stock frame. I have tried to contact him and he will not ship so that puts me in a bad position.

Posted by: racerx573

Did you read my post? I listed all the mods needed to do it the best and most correct way to maintain frame integrity.