[Laeger Pro-Trx Build] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVsPages:1
Laeger Pro-Trx Build
(Click here to view the original thread with full colors/images)
Posted by: 312R1
Well here are some pic's of the build so far...I'm pretty much just putting all my parts from my FrontLine framed R that I built on the Laeger Pro-trax.
I still need to get my pro-trax front end back from Laeger..I sent it to them so they could rebuild, replace all bearings and chrome the arms and the stem.
I'm dropping off my Custom Axis shock tomorrow so the can switch it from a no-link to a CR500 link. I hope to have it finished up in a month or two.
-Steve
Posted by: 312R1
Pic #2
Posted by: 312R1
Last one for now.
Posted by: mineralgrey01gt
man thats gonna be sick!
Posted by: BKex
looking sweet 
Posted by: TRR440EX
going to be sick as hell man!
Posted by: my88r
looks good keep us up on the pics.
Posted by: racerx573
I told you so! Haha. 
Posted by: criminalpoet
Thats going to be a badazz bike man! Sucks when you wreck it for the first time though lol. I just went through that this last weekend.
Posted by: mxduner
dude that thing is sweet! gonna rip too
Posted by: danhung11
Ditto to all the above...
That is going to be a heck of a ride. Did you get that motor off ebay?
Nice audience in pic#3! 
Did you want to trade that two piece from plastic for a one piece?
Posted by: TANNER250r
If you don't mind me asking where did you get that gas cap?
Posted by: 312R1
quote:
Originally posted by danhung11
Ditto to all the above...
That is going to be a heck of a ride. Did you get that motor off ebay?
Nice audience in pic#3!
Did you want to trade that two piece from plastic for a one piece?
I built the engine over this past winter..check out my thread.. The rebuild has begun
Sorry but no..The plastic is NEW OEM that I bought in the spring.
Thanks,
Steve
Posted by: 312R1
quote:
Originally posted by TANNER250r
If you don't mind me asking where did you get that gas cap?
I got it off of ebay..it has the flames on the top.
Thanks for the compliments guy's.
I dropped off my rear shock at Custom Axis this morning and I got a call this afternoon saying it was finished..
All they had to do was change the bottom of it to make it fit the CR500 link, but still I wasn't expecting it to be finished that fast!
Posted by: atvmxr
so you buy all new stuff from laeger or? thought he quit making R frames and etc...
Posted by: 312R1
quote:
Originally posted by atvmxr
so you buy all new stuff from laeger or? thought he quit making R frames and etc...
The frame is off of a complete 03 Laeger pro-trax I that I bought. I kept the frame and pro-trax and sold all the other parts I didn't need or want.
Posted by: ct350trx
Are there any updates?
Posted by: 312R1
quote:
Originally posted by ct350trx
Are there any updates?
I have gotten a few parts but I'm out of town working so I haven't put them on yet...I will update when I get home..
Posted by: banshee84
man that looks great, I hope to be able to build a 250r one day
Posted by: korniev
WOW WOW WOW WOW I can keep on saying this for ages!
In fact there are no words man! You already had the sickes R on this site and I think you wanted to sell it, however now you are making it even better! KUDOS man
AMAZING
Posted by: korniev
Man! Please post more pics of that beauty
Posted by: 250Renvy
When you get back I'd be interested to hear what they had to say or what it cost to get the no-link converted to a CR500 link.
Unfortunately I have both a CR500 link and a 250R link shock and I want to see if I can get one converted to a no-link.
Posted by: 312R1
quote:
Originally posted by 250Renvy
When you get back I'd be interested to hear what they had to say or what it cost to get the no-link converted to a CR500 link.
Unfortunately I have both a CR500 link and a 250R link shock and I want to see if I can get one converted to a no-link.
It was a brand new shock so all they did was swap it to a cr500 style and valve it for me..it cost around $150 which I thought was great. I'm home now so I will get the rear end put together this weekend
-Steve
Posted by: 312R1
Ok here is some pic's of the build so far.
Posted by: 312R1
Pic #2
Posted by: 312R1
Pic #3
Posted by: 312R1
Pic #4
Posted by: 312R1
Last pic
I'm still waiting on my pro-trax front to come back from Laeger, once I get it it will be finished..Later I will get some new rear beadlocks and a PWR radiator
Posted by: ct350trx
Nice bike, but I found it nicer with the other seatcover
Let the pictures comes!!!
Posted by: danhung11
Makes me want to build another one!
Posted by: 312R1
quote:
Originally posted by ct350trx
Nice bike, but I found it nicer with the other seatcover
Let the pictures comes!!!
LOL...Yeah I'm going to replace that seat cover..just haven't found the one that I want...I'm looking for the old school CEET american flag seat cover, thats what I had in the mid 90's and would like to find one.
Posted by: 800screws
hey this R on ebay has the cover u wanted, i think...
260178496621
Posted by: 312R1
quote:
Originally posted by 800screws
hey this R on ebay has the cover u wanted, i think...
260178496621
Yeah thats pretty much it..the only difference is the one I want isn't a nonslip..where that one is grey mine was red.
Does anyone know if CEET has a website?
Posted by: 312R1
quote:
Originally posted by 800screws
hey this R on ebay has the cover u wanted, i think...
260178496621
Here is a pic of the seat cover I'm looking for This is my old R and this pic was taken in or around 91..
Posted by: CorvetteZ06
looks great man!!
Posted by: racerx573
I hope you plan on taking the plastic off before you put the front end on, haha. The narrow frames are a pain in the arse to get a t-pin stem up in. And you have to put it i n clamps first from the bottom usually.
Posted by: 312R1
quote:
Originally posted by racerx573
I hope you plan on taking the plastic off before you put the front end on, haha. The narrow frames are a pain in the arse to get a t-pin stem up in. And you have to put it i n clamps first from the bottom usually.
LOL..Yeah I know..It was a pain to get it out..I talked to Laeger yesterday and I should have my front end back in two weeks..
Posted by: ct350trx
Do you know what it costs for a compleet rebuild of your a-arms and t-pins?
Posted by: 312R1
quote:
Originally posted by ct350trx
Do you know what it costs for a compleet rebuild of your a-arms and t-pins?
My total is $796.00, but I'm having the uppers, lowers and the stem chromed.
Posted by: korniev
312R1 you are the madman! U go all the way
)))
Posted by: ct350trx
quote:
Originally posted by 312R1
My total is $796.00, but I'm having the uppers, lowers and the stem chromed.
Do you know what is costs for only the t-pins?
Posted by: 312R1
quote:
Originally posted by ct350trx
Do you know what is costs for only the t-pins?
That I'm not sure..I forgot to mention..That price was with chrome tie rods also. If I had to guess, I would say around $300 or less.
Posted by: 312R1
quote:
Originally posted by korniev
312R1 you are the madman! U go all the way)))
Thanks...I like and want the best. I'm very picky about my toys..lol
Posted by: racerx573
I get my t-pins rebuilt for less than $150 :-) let me know next time you need it rebuilt.
Posted by: 312R1
quote:
Originally posted by racerx573
I get my t-pins rebuilt for less than $150 :-) let me know next time you need it rebuilt.
I wish I would have known that.
Posted by: 800screws
jay, can u PM a number or email on who rebuilds them?
Posted by: number5
Yes I would like to know where I could get rebuild parts cheap for t pin.
Posted by: 312R1
Finally!!! Some update pic..
Posted by: 312R1
Money shot!!!
Posted by: 312R1
Another.
Posted by: 312R1
Last pic for now...I'm still not finished, still have some odds and ins to do..like new seat cover, new rear beadlocks, new PC2000, Paul Turner hand made pipe and put the front brakes on. Oh and JL kick starter..
Is there any interest in these front shock's..They are almost brandnew..have less then 4 hours on them. I think I'm going to get Custom Axis so all three shocks are the same.
-Steve
Posted by: Aceman
Looks fantastic Steve! It's a good thing you're taking pics now, I know once you ride it it's almost impossible to get it that clean again. To many nooks and crannies.......
My goal one day is to have a Laeger Narrow Pro-trax setup strictly for duning.
Posted by: 312R1
quote:
Originally posted by Aceman
Looks fantastic Steve! It's a good thing you're taking pics now, I know once you ride it it's almost impossible to get it that clean again. To many nooks and crannies.......
My goal one day is to have a Laeger Narrow Pro-trax setup strictly for duning.
Thanks bro...It will pretty much always be this clean...I can't stand to have something thats dirty...after every race, or practice it will be cleaned from top to bottom.
Oh and on the Laeger...man this front end is SMOOTH!!!!
Posted by: my88r
LOOKS AWSOME MAN!!! glad to see it finished. now keep this one.LOL
Posted by: 250Renvy
Are those arms +3 or +4?
Posted by: 312R1
quote:
Originally posted by my88r
LOOKS AWSOME MAN!!! glad to see it finished. now keep this one.LOL
Thanks bro,
but it's still not finished..
Posted by: 312R1
quote:
Originally posted by 250Renvy
Are those arms +3 or +4?
There +4's. I have an extra set of +4's if your looking for some.
Posted by: havinnoj
Lookin real good!!
What wheel offset and wheel size are you running in those pics?
PM me with any helpful info on setting up or anything that would be good to know about the front end... I have one that hasn't been put on my bike yet.
Posted by: 312R1
quote:
Originally posted by havinnoj
Lookin real good!!
What wheel offset and wheel size are you running in those pics?
PM me with any helpful info on setting up or anything that would be good to know about the front end... I have one that hasn't been put on my bike yet.
Thanks!
The fronts are 3+2 offset 20-6-10. Rears are 8X8 with 18-10-8.
The front end is really straight forward..I still have to set my toe and everything.
If you need anymore info just let me know and I'll do my best to help.
-Steve
Posted by: mdickerson319
what price are you wantingout of front shocks? what are they set up for? your project looks pretty sweet!
Posted by: 312R1
quote:
Originally posted by mdickerson319
what price are you wantingout of front shocks? what are they set up for? your project looks pretty sweet!
Not really sure..Like I said there pretty much brandnew, only 4 hours on them. I paid right around $1,000 so make me an offer.
Thanks,
Steve
Posted by: dustinshuler
its beautifull, Ive had tons of Leagers over the years and thats one of the best Ive seen.
Posted by: brandonpeake
could someone please explain the difference between a no link and a cr500 link like which link is better for what type of riding etc
thanks
Brandon
btw love the bike
Posted by: 312R1
quote:
Originally posted by brandonpeake
could someone please explain the difference between a no link and a cr500 link like which link is better for what type of riding etc
thanks
Brandon
btw love the bike
Both are good set ups if there done right..The CR500 link is best for MX and the no-link is better for XC..but you can use either one in both types of riding.
Thanks for the compliments guys!!
Posted by: deathman53
quote:
Originally posted by racerx573
I get my t-pins rebuilt for less than $150 :-) let me know next time you need it rebuilt.
where did you have them rebuilt for that price, I'm looking for a complete rebuild also.
Posted by: havinnoj
quote:
Originally posted by deathman53
where did you have them rebuilt for that price, I'm looking for a complete rebuild also.
yeah that!
Posted by: 312R1
Update pic...only thing left is my Custom Axis piggy back shocks and new PC2000 to show up.
Posted by: TRR440EX
wow.... thats all i have to say just wow
Posted by: havinnoj
that is sweet! can't wait to see the finished product steve!
Posted by: 312R1
Thanks guy's..
Posted by: ct350trx
It's a nice bike.
Posted by: my88r
is the dam thing done yet..
i hope the next pic i see it as MUD on it
LOL.. NICE COVER!!!!!
Posted by: 312R1
quote:
Originally posted by my88r
is the dam thing done yet..
i hope the next pic i see it as MUD on it
LOL.. NICE COVER!!!!!
LOL...you will never see a pic with mud on it unless it's a track pic..
Posted by: Lynch01ex
Hey really nice bike! I pretty much have the same bike except white frame, PEP shocks, and motor. Anyways throwing a suggestion out there. You might want to get a skid plate for the frame. lol dont wanna mess up that nice new powder coat
Posted by: 312R1
quote:
Originally posted by Lynch01ex
Hey really nice bike! I pretty much have the same bike except white frame, PEP shocks, and motor. Anyways throwing a suggestion out there. You might want to get a skid plate for the frame. lol dont wanna mess up that nice new powder coat
Thanks..post a pic of yours..I injoy seeing other Laeger R's..
No skid plate, don't want the added weight.
Posted by: Lynch01ex
i will deff post some pics soon as i get it all put back together
Posted by: spanky101
im not really sure but tag might make a skid plate fr the 250r... its a lightweight heavy duty plastic of sorts i think. Its called the tag railer skidplate, check it out man!
Posted by: KwAdUp
sick quad. i wanna do a 250r rebuild
vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray
