[preddy won't fire] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs
Pages:1



preddy won't fire

(Click here to view the original thread with full colors/images)



Posted by: ride red 14

i have a 04 troy lee preddy. it will crank but no fire to the plug. has any one else had this problem? any help where to start would be great.



Posted by: the Z Man

Check your coil wire, kill switch, plug. Does it have an aftermarket kill switch?
Check spark to all and trace it back..



Posted by: ride red 14

i dont even have any fire to the coil



Posted by: Bradracer18

There is a little black "bag"....near your ....leg area, on the clutch lever side. Find it and check to see if there is power on both sides of that. Its a small, circuit breaker type thing in there.


Check to see if there is power on the battery, and on the other side of the coil first. Check grounds too.



Posted by: ride red 14

has anyone had there start/stop switch (on the left bar) go bad. i can unplug it and jump the hot wire to the wire going to selenoid and it will crank, still no fire to plug though. i wonder if the switch could be bad not letting fire get to everywhere it needs to be. thanks for any help.



Posted by: OutlawBill

Check all brown and black wires for shorts if the insulation rubs off it will kill the engine.



Posted by: ride red 14

all of that stuff is good i think its the kill switch but im not sure



Posted by: ride red 14

all of that stuff is good i think its the kill switch but im not sure



Posted by: ride red 14

all of that stuff is good i think its the kill switch but im not sure



Posted by: ride red 14

all of that stuff is good i think its the kill switch but im not sure





vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray