[660 Raptor Clutch Problems] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs
Pages:1


660 Raptor Clutch Problems

(Click here to view the original thread with full colors/images)


Posted by: chief4848

I changed the clutch in my 660 raptor and now I cant get any pull from the pull lever to the pressure plate. I have the manual and the clutch is installed properly. I torqued all the spring bolts on the pressure plate to the specified settings. I suspect that the problem is in the pull lever shaft or the pull rod since I have this problem before I even hook up the clutch cable. Any suggestions? Thank you!!


Posted by: QuadManiac

You have to pull the clutch lever off of the splined shaft, rotate the shaft clockwise till you feel it start to engage the clutch, then put the lever back on with the marks lined up. This should put everything in proper position.

Good Luck!




vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray