[crank spacer??? help] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

crank spacer??? help
(Click here to view the original thread with full colors/images)

Posted by: skyhighatv

hi guys hows it goin-i need some help,im in the middle of doing a complete bottom end-i have the trans and internal shift components in and im about to seal the case-MY CLYMER MANUAL SHOWS A CRANK SPACER ON THE RIGHT SHAFT OF THE CRANK before closing the case-i have two bottom ends(one with bad crank,one with bad right case) that im making a good one from-so i have two of everything and zero crank spacers can someone give any info about this spacer? all help is greatly appreciated-thanks.

Posted by: skyhighatv

if anyone has split there cases-is there a spacer that goes on the crank shaft before the right side case?

Posted by: methyman

The only spacer on the right side (clutch side) is for the seal to ride on it. It is a collar. See picture.

Posted by: Rich250RRacer

quote:
Originally posted by methyman
The only spacer on the right side (clutch side) is for the seal to ride on it. It is a collar. See picture.

That collar should be replaced with a new one any time a bottom end is taken apart. The seal will wear a groove in the collar and if the old one is used there's a good chance of a leak.

Posted by: skyhighatv

thanks guys i appreciate the help-i think my clymer is a miss print or some thing because every picture of the cases split is showing a spacer on the crank?
thanks again.