[Outlaw 90] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Outlaw 90
(Click here to view the original thread with full colors/images)

Posted by: pbr524

Anyone know were to get aftermarket parts for the new outlaw90 and if there is anything out for them yet? Nerfs,Pipe and BumperAnd can you hook a prodesign killk directly up to the stock tether?

Thanks Mike

Posted by: 250rbadboy

is it 2 or 4 stroke? if its the 2 then any thing for the predator 90 whould work.i whould think.

Posted by: Choppers

it's a 4 stroke.

Posted by: Jarhead

Hetricks has some items that they are starting to produce.

Posted by: BradLoomis

All the stuff that I know of is coming out of Rath Racing.

Contact Us
Rath Racing Incorporated
20784 Highway 15 North
Hutchinson, MN 55350

Phone: 320.234.7223
Fax: 320.234.7233
E-Mail: orders@rathstore.com

Posted by: schortzracing

YOU CAN ALSO CONTACT YOUR DEALER, THEY SHOULD BE ABLE TO ORDER ALL THE PARTS THAT COME ON THE OUTLAW 90 LTD NERFS, SHOCKS, TIRES ECT.

Posted by: jetta75

The stock tether isn't great and not easy to use so I hooked up a pro armor. Had to hook it up to the coil and ground. The stock wires would not kill it.

Posted by: jjd223

The action on the stock polaris outlaw tether is not the same as the aftermarket tethers. The Outlaw stock has a normally open switch, it is closed with the tether on, and the circuit opens when the tether is pulled. This interrupts the start safety circuit and does not ground the coil. the Most other tethers are normally closed switches and they are open with the tether on and the circuit closes when the tether is pulled and grounds the coil.

Posted by: tireman43

You can buy an aftermarket tether both ways. You can also wire the aftermarket tether direct to the coil and ground.