[400ex a-arms on 300ex??] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs
Pages:1



400ex a-arms on 300ex??

(Click here to view the original thread with full colors/images)



Posted by: KrazyKeith

Will they bolt up? I guess you would need tierods and brakelines too?? Will the 300's shocks still work?



Posted by: alexmx22

They bolt up you may need to extend your
brake lines and i cant remember if you can use the stock shocks but i dont think they're tall enough.



Posted by: SET THE STAGE

what you'll need to do it

400ex arms
400ex tie-rods
i've heard 400ex spindles, hubs, and brake setup improve the handling a lot
shock relocator (you can get them on ebay cheap)
and 400ex shocks



Posted by: KrazyKeith

thanks



Posted by: 400exrapes

what about the 400ex axle?



Posted by: SET THE STAGE

i've never heard of a 400ex axle fitting but i have heard a 350x will fit



Posted by: markvette

works can build a shock that will fit with the 400 arms without useing the shock relocator. i just put a new pair on my sons 300 2 days ago. i also put a lsr 400 ex axle in it. had to make a small spacer on the brake rotor side.

Mark



Posted by: martell06

does this work for the 250x? why do you need shock spacers? to maintain stock height?



Posted by: castone001

Shock reloacator??

I searched ebay but couldn't find one? I did get an entire front end from a 400ex plus the shocks. So sounds like all I need are longer brake lines and the relocator.

Can any one hook me up?

thanks,
Chris



Posted by: 300maniac

ull be fine with the brakes there is enough slack



Posted by: 300exOH

quote:
Originally posted by castone001
Shock reloacator??

I searched ebay but couldn't find one? I did get an entire front end from a 400ex plus the shocks. So sounds like all I need are longer brake lines and the relocator.

Can any one hook me up?

thanks,
Chris



Search for 300ex shock and you should find it. And as 300maniac stated the stock 300ex brake lines will work.

martell06- Yes it will work on the 250x with the upper shock mount relocator.



Posted by: castone001

I searched on all sorts of combos with 300ex shocks. Must not be any out there at the moment. Anyone know where or who I can contact to locate one?

thanks all!



Posted by: 300exOH

I searched ebay for "300ex shock" and these 3 came up on the first page...

edit: links didn't work... try this

http://search.ebay.com/search/searc...hock&category0=

There are 3 or 4 of them on this page starting about halfway down.



Posted by: castone001

Cool!! Found em THANKS!!

Bid is in.

Also, I won a 2001 Raptor Rear shock that I plan on putting on the 300. Anyidea best way to increase the length of the reservoir hose? Do I need to take it to a shop or is this something I can do myself?



Posted by: 300exOH

quote:
Originally posted by castone001
Cool!! Found em THANKS!!

Bid is in.

Also, I won a 2001 Raptor Rear shock that I plan on putting on the 300. Anyidea best way to increase the length of the reservoir hose? Do I need to take it to a shop or is this something I can do myself?



No problem.

You'll have to have the hose replaced with a longer one by a qualified tech. It's not really a DIY type thing. The shock will have to be refilled with fluid and it would be a good idea to have the shock serviced(seals and etc. replaced) when/if you replace the hose. The stock hose will work if you mount the reservoir on the left side of the quad just in front of the battery. It's a tight fit but it will work.





vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray