[What 400 ex parts will fit on a dale] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

What 400 ex parts will fit on a dale
(Click here to view the original thread with full colors/images)

Posted by: K_Fulk

I'm pretty sure my pep shocks will fit on one. but how about axles and hubs and stuff?

....by the way look for my 400ex in the new cycle trader this week

Posted by: lil400exman

ohh man no!!!! we lost a honda man!

:grr go away and nevercome bak! no jjust kiddin hubs bars plastic from 400ex to cdale a 440ex would do better.........

Posted by: Hey Koolaid

Mine is stock but I know a guy that has 400EX tie rods.

Posted by:

shocks are swappable too,,I've seen it first hand..and yes tie-rods too and ends i believe..

Posted by: Pappy

front shocks will......but rear?

Posted by: slates74

I dont believe the rear will fit, the linkages, or the no link in c-dales case, will not match up.

Posted by: justfine

Hubs are the same pattern. Wheels will interchange.

Posted by: AlaskaSpeed

tie rod ends won't work with the stock stem setup. They don't have clearance. Houser makes a stem that allows you to run the trx style tie rods and ends. front shocks swap, rear sprocket swaps, wheels are right bolt pattern but not the same offset, and 250R a-arms have the same measurements at the mounts...just not sure about the ball joints/spindle fit, haven't tried it yet.........................JIM

Posted by: Sick0

I know you can 400ex a-arms if you have the spindles off 400 because they use 250r style spindals. I heard the axle fits. The handlebars will fit.
I have a friend that mounted a 250f pipe on one. I don't klnow if that some hot set up or not but its faster than stock.

Posted by: K_Fulk

Thanks for the info guys.

Posted by: josh

y in the **** would you want to put something off a honda on a cdale, jus wanderin cuz they build like the best stuff, unless it's standard and you have some really really nice parts for it

Posted by: Godspeed

I was thinking about putting a Honda sticker on my Dale but also the numbers 2004 before it. As a joke. You know 2004 Honda. My friends are hoping that Honda comes out with a 2004 racer.

Posted by: K_Fulk

Well i got some pep shocks that i could put on a dale. About 3 sets of wheels and tires. And i'm hoping my rpm front hubs will fit on a dale. And if i'm lucky my laeger a-arms and rpm axle will fit too. I wanted to know what all would work before i started selling all my after market parts.
I'm glad c-dale copied a lot of honda stuff it makes things a little easier

Posted by: AlaskaSpeed

I know I saw an FX 400 that installed a 250R axle, but he had to "make" it work. I know it can be done, just not sure of what is involved....JIM

Posted by: Sick0

I wonder if the stering stem will fit.

Posted by: suzuki Z400

A C front bumpers have the same bolt pattern i guess all bumpers would.

Posted by: Sick0

Yeah I've heard the bumper fits to.