[help] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

help
(Click here to view the original thread with full colors/images)

Posted by: lundgrener02

ok so i'm sure you guys here have heard this a million times but my friend has a kfx700 and we just put a white bro's pipe on it and we need to jet it, so i have no idea how it is done on this bad boy. i just know you have to change two jets and it seems like i read one is larger than the other.

any directions to a place where someone has done this and has a "how to" on this would be awesome.

oh and if you have any ideas on a good starting point with jets let me know. its a white bro's carbon pro full system, we will do some mods to the air box for more air flow.

thanks for any help.

Posted by: ibthegator

all the info you need at kawieriders.com
and do not forget to shim the needles with a #4 brass washer

If you remove the boot over the belt cover you can access the bottom of the carbs without removing them.
Very simple and quick.
I have mine set at 195front-198rear and one shim under each needle at around 500 feet above sea level.
Also do the 12 1" holes in the airbox.
It is a new beast.

Posted by: lundgrener02

alrighty thanks man.

Posted by: KTM265

Is this a stock motor or do you have some other mods done?