[kasea 90 rear brake linkage] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

kasea 90 rear brake linkage
(Click here to view the original thread with full colors/images)

Posted by: f1502nv

how do you extend the rear brake linkage for a longer swingarm?

cut and weld?

Posted by: wvspeedfreak

What I did was made a new one out of 6mm threaded rod.It has held up good so far but I would like to make one out of roundbar to make it a little more rigid..

Posted by: f1502nv

i did that and mine broke

Posted by: Livin4Real

get a small piece of larger diameter steel and drill out both ends the diameter of the stock linkage, then cut your stock linkage in a straight area and insert the extension and weld in place

Posted by: f1502nv

i ended up taking 1/4 ich rod and put thread on it with a tap and die....then heated up the end with the 90 and bent it...that worked out so much better...it is alot stronger!!!!