[36or37 tooth sprocket ??] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

36or37 tooth sprocket ??
(Click here to view the original thread with full colors/images)

Posted by: EagleLakeGangMX

[SIZE=1][B]which should i go with??

Posted by: redrider330

well it depends on wat u want top end or bottom bigger u go slower thet op speed 4 the back and faster 4 the front smaller u go in the back or bigger u go in the front more top end so wat ever your type of riding u do

Posted by: Family Guy

One tooth up or down on the back will not even be a noticible change. Go two teeth on back to make a change that you will notice. One tooth on front sprocket will be noticible.

Posted by: bwamos

What size tires are you running.. and what conditions are you riding in? (dunes, trail, mx, etc..) Also are you at the stock rev limit, or increased rev limit?

Posted by: EagleLakeGangMX

quote:
Originally posted by bwamos
What size tires are you running.. and what conditions are you riding in? (dunes, trail, mx, etc..) Also are you at the stock rev limit, or increased rev limit?

im runnin 20s..my mods are is my sig..and i ride mostly trails and roads and the occasional trip to the track..and stock rev.. i dont want a huge change soo should i go 2 smaller back or 1 front??

Posted by: N300exJ

keeping it close to stock gearing go up one in the front. For a lil bit more top end over stock go up one in the front along with dropping two in the back.

Posted by: Sjorge300EX

the 13/36 is a little slower than a 14/38 setup. If you are interested in a 36, I have a JT Steel one laying around. Its brand new, i put it on and took it off and went with the 14.

Posted by: EagleLakeGangMX

how much including shipping to 55803??