[Moose CR style killswitch install] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Moose CR style killswitch install
(Click here to view the original thread with full colors/images)

Posted by: 250Renvy

Trying to install a moose kill switch and confused how to wire it in. On the cr kill there is a black male ended wire and a green female ended wire and a green ground wire right beside the button.

My question is, do I plug the black wire into the Key switch black wire or do I plug it into the black wire that is used for the stock kill switch/headlight control and just leave the green female ended wire not plugged into anything? Or do I need to plug both into something and rewire the green for a male end?

What do I do with the green ground wire with the circle end? It is really short and can't go more than an inch away from the kill button.

Thanks

Posted by: deathman53

the green with a loop goes under the screw for the kill swtich, the other end connects to the ground for the key swtich. the black plug connects to the power for the key switch.