[Race Ready 300ex Part out!!!] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVsPages:1
Race Ready 300ex Part out!!!
(Click here to view the original thread with full colors/images)
Posted by: Cody_300ex
GDH Racing +3.5 Longtravel A-arms - Powder coated bright Red, Accepts 400ex length shocks or YFZ shocks The PC is in average shape. Very strong and rare a-arms, Like 1 of 15 pairs, if that. With 2/3 offset wheels it is right at 49.5 and lowered down for TT Its right under 50 Inches. I have owned them since about April of last year. They also have special mounts for a swaybar. Also if you get a Shock relocator you can run 19.5 and 20 inch shocks on it depending on the relocator. In my opinion and from my experience when these a-arms are mated with the right shocks it can't be beaten, it's the best front end on the market for the 300ex. Shoot me an offer
Ricks Hot shot CDI - Works great on any semi-modded 300ex motor, used it for about six months. It still works, tried it on a friends 300ex not long ago. 40 bucks shipped
Frame- Pretty good frame, no cracks or breaks, structurally sound. Needs a PC or paint job. No title but I do have the bill of sale. I Will Rubber coat it for an extra 35 bucks. Make Decent Offer
Stock rear shock - Good shape, not blown. 45 shipped.
Stock Gas tank W/ Polished Gas cap - Nice shape, not any leaks. There is one dent at the very top of the tank. Some slight wear on the paint but very structurally sound. Comes with the petcock and the plastic peice used to adjust it. Make Offer
Stock Rear Plastic w/ brace - ok shape, has a few white spots, and quite a few scratches. No cracks or breaks tho. Red. 75 + shipping
Stock steering Stem - Straight, good shape, will include polished Handlebar clamps & bolts. 65 shipped
White 250r race cut front Fenders w/ red hood - Hood is in great shape but the Fenders are about shot. Good structural Shape but just rough looking, would look fine with a little bit of sanding. Will include the adapters to put on a 300ex. 35 + shipping
Durablue Rear lowering kit - Comes with all hardware, in good shape. 40 shipped
Complete Brake system Front only - Extremely good pressure, decent pads, no leaks what so ever, No bleeding needed. Comes with SS front brake lines, Calipers, rear lines, Both master Cylinders, everything, even the rotors if ya want em - MAKE OFFERS!!
Footpegs - Painted with 2 layers of Rubbercoat, Freshly, sharpened, no cracks, good condition - 45 shipped
Full chain and sprocket set - A 13 & a 15 tooth front sprocket, a 38 & 33 tooth Rear sprocket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers
Stock Skid Modded Swingarm Skid Plate - Welded 10 gauge metal to it to strengthen it up, Rubbercoated black, looks like new. - Make offer
Front Hubs - I have three of them. Bearings and studs where replaced in two a year ago. The color is also in great shape also. - Make Offer
Stock Honda Throttle Housing - The Top is PCed chrome, The body is fire Red, and the clamp is prism Black. Very smooth, a little wear but not to bad. - 40 shipped obo
Stock 300ex Tie rods - Polished, straight where used for maybe one year. Never Bent. - 15 shipped
400ex Triple Rate Works shocks - One shock is fine, the other will need a shaft, spring retainer, rubber bumper, and the washers. The bodies have been polished. Works quoted me 75-90 bucks including labor to fix. - $65 shipped
Shoot me some offers on this stuff, It just sits in my basement taking up space.
Any Other part you can think of, Just ask, I will more than likely have it if it isn't already sold. I will consider trades for LTR, and possibly car parts.
You can call my Cell 1-270-210-8952 After 3:00pm about any parts for a 300ex you could possibly need. Also e-mail me at fastandthefurious67@msn.com
Just ask about anything else, I have a garage full of parts for 300ex's
Posted by: Project300EX
pm'd
Posted by: enduro400rider
would you sell the head off the motor? you could keep your cam and i could send you a very nice stock head for you to put back on
Posted by: Cody_300ex
quote:
Originally posted by enduro400rider
would you sell the head off the motor? you could keep your cam and i could send you a very nice stock head for you to put back on
Im might think about it, shoot me and offer but more than likly not.
Posted by: ZeroLogic
How the gas tank? Any cracks or rust? How much?
Posted by: Cody_300ex
Its In good condition, no rusts or cracks. But its not coming off till i get some bigger parts sold.
Posted by: Cody_300ex
bump
Posted by: Caseys 300ex
I sent you a pm Cody.
Posted by: Cody_300ex
Bump. I also have a Billet Megacycle cam that has .350 lift and 290 degrees in duration. It was a spare cam I had..
Posted by: Cody_300ex
Pic's
Posted by: Cody_300ex
another
Posted by: Cody_300ex
another
Posted by: Cody_300ex
another if you want more just ask
Posted by: PolarisRider
How much for the header?
Posted by: Caseys 300ex
how much do u want for your starter soleniod.
Posted by: Cody_300ex
Bump, new stuff added and prices dropped..
Posted by: Cody_300ex
bump
Posted by: Caseys 300ex
How much do you want for your soleniod?? Plz answer!!
Posted by: Cody_300ex
quote:
Originally posted by Caseys 300ex
How much do you want for your soleniod?? Plz answer!!
Its going with the motor, sorry.
Posted by: Caseys 300ex
Alright thanks anyway
Posted by: ryanh250ex
Just wanted to tell yall that I bought the Axis shock 
Posted by: Cody_300ex
Pics of the head w/ the TC engraving
Posted by: Cody_300ex
another
Posted by: Cody_300ex
Bump
Posted by: Cody_300ex
Everythings still here, I just cleaned it up really good, and changed the oil yesterday.
Posted by: Caseys 300ex
Will you sell the soleniod now?
Posted by: kwik02gixxer
will you take $100 shipped for the rear plastic to 43102?
Posted by: Cody_300ex
The Motor and Rear shock are pending payment as of right now. I have dropped the prices on several parts. I need to get rid of this stuff fast now.
Posted by: DJR300ex
$65 bucks shipped to 65536 for the 250r front plastic?
Posted by: Cody_300ex
quote:
Originally posted by DJR300ex
$65 bucks shipped to 65536 for the 250r front plastic?
75 and there yours
Posted by: DJR300ex
ok cool. do you have any better pics of them?
Posted by: DJR300ex
oh and one more thing, do you think they would work with my clarke tank?
Posted by: Cody_300ex
Yeah they should, I will send the mounts that I made for them. The 2 far rear mounts are zip tied. no real better pics..
Posted by: JoE4554
do you still have the stock swingarm?? if so , do u know if its aluminum or steel??
Posted by: Cody_300ex
I still have it, It is steel.
Posted by: JoE4554
ill take it , pm me so i can send a mo and how much
Posted by: Cody_300ex
Clean out your PM box Joe
Posted by: JoE4554
cleaned out
Posted by: Cody_300ex
Bump, I need to get rid of this **** fast, make me offers on parts.
Posted by: Cody_300ex
Bump...
Posted by: Cody_300ex
upppers
Posted by: scooter2479
Do you still have the frame? Any rust? Rock botton price?
also do you still have the red race cut fenders and are those front or rear?
Posted by: Cody_300ex
quote:
Originally posted by scooter2479
Do you still have the frame? Any rust? Rock botton price?
also do you still have the red race cut fenders and are those front or rear?
I still have the frame, there is some surface rust, nothing bad tho. tell me how much you have to spend and I'll think on it. Yes I still have the red race cuts, there fronts...
Posted by: Cody_300ex
Have it down to a rolling chassis, start making me offers on any part you can think of!
Posted by: Cody_300ex
To whoever wanted pics of the header..
Posted by: Cody_300ex
another
Posted by: Cody_300ex
last
Posted by: Cody_300ex
bump
Posted by: Cody_300ex
Bump
Posted by: DJR300ex
100 shipped for the cam?
Posted by: DJR300ex
if i bought the cam from you would i have to have hardened rocker arms too?
Posted by: Cody_300ex
quote:
Originally posted by DJR300ex
100 shipped for the cam?
This is a 200 dollar plus Billet cam. You should be able to come up with 20 extra bucks.... No all it requires is H/d valve springs.
Posted by: DJR300ex
pm'd
Posted by: beefcake
I've been looking for an exhaust, but your price seems almost as much as new......could you come down a bit?
Posted by: 300ex_#387
$75 shipped for header?
Posted by: Cody_300ex
quote:
Originally posted by beefcake
I've been looking for an exhaust, but your price seems almost as much as new......could you come down a bit?
shoot me an offer
Posted by: Cody_300ex
Pics of the nerfs
Posted by: Cody_300ex
Another, they will come with black nerfs nets, there just getting washed right now...
Posted by: markvette
clean out your pm box i pm'ed you a offer on the pipe. let me know when you clean it out so i can pm you again.
Mark
Posted by: Cody_300ex
Ok It's clean....
Posted by: Cody_300ex
Still have plenty of parts, keep the offers coming.....
Posted by: Cody_300ex
OK guys, I need 700 bucks in about a week to get enough money for my new LTR please make me some offers on this stuff I need it gone ASAP!!
Posted by: Cody_300ex
TTT
Posted by: hondarider110
do you have a cam, springs and valves left ? if so how much
Posted by: Cody_300ex
I have a cam, no valve springs or Valves.
Posted by: Caseys 300ex
What kind of cam is it? and how much do u want for it?
Posted by: XCAdam89
I'll have the money order out tonight hopefully. Thanks again!
Posted by: hondarider110
what kind of cam and how much
Posted by: Cody_300ex
Heres the info i have on the cam
Megacycle Race Profile Billet cam - .370 Valve Lift .272 Duration @ 40 Degrees. Has about 75 hours on it. Very good shape. Good powerful cam. - 120 shipped OBO!
Posted by: DJR300ex
i blew a front shock yesterday, whats the cheapest you can sell me your YFZ shocks?
Posted by: Cody_300ex
quote:
Originally posted by DJR300ex
i blew a front shock yesterday, whats the cheapest you can sell me your YFZ shocks?
No less than 195 shipped Its going to be at least 15 bucks to ship these depending on location...
Posted by: markvette
hey not to cause any problems but i think people should know what they are buying. i done a search on that cam, its an awesome cam but their website says you have to use better springs and the shortened valve guides to run it. just to compare i checked web cams website and their cam that has 360 of lift they also say you have to use the shortened valve guides. like i said not trying to cause trouble, just dont want someone to buy it and expect to just drop it in and run it.
Mark
oh i still may be interested in the pipe if you still have it.
Posted by: Cody_300ex
quote:
Originally posted by markvette
hey not to cause any problems but i think people should know what they are buying. i done a search on that cam, its an awesome cam but their website says you have to use better springs and the shortened valve guides to run it. just to compare i checked web cams website and their cam that has 360 of lift they also say you have to use the shortened valve guides. like i said not trying to cause trouble, just dont want someone to buy it and expect to just drop it in and run it.
Mark
oh i still may be interested in the pipe if you still have it.
I still have both, but on the cam, in my motor there where no shortened valve guides and it was perfectly fine.
Posted by: Cody_300ex
Bump
Posted by: SGARCIA89LX
how much for the wheels???and will they fit a 250ex
Posted by: Cody_300ex
quote:
Originally posted by SGARCIA89LX
how much for the wheels???and will they fit a 250ex
Im keeping them
Posted by: Cody_300ex
Come on guys throw me some offers!!! I need this chit gone ASAP!
Posted by: Cody_300ex
quote:
Originally posted by Cody_300ex
Come on guys throw me some offers!!! I need this chit gone ASAP!
Posted by: XCAdam89
Did you ever get my M.O. for the Nerfs????
Posted by: Cody_300ex
quote:
Originally posted by XCAdam89
Did you ever get my M.O. for the Nerfs????
Yes, I have recieved it and will get them out ASAP.
Posted by: Cody_300ex
quote:
Originally posted by XCAdam89
Did you ever get my M.O. for the Nerfs????
Sorry about the wait on the nerfs, they should be shipped tommrow. Ive been on spring break all last week.
Posted by: Cody_300ex
Ok If somebody can have 485 dollars to me by the end of the week you can have my whole entire front end, front shocks, a-arms, ball joints, bolts everything. I need to get this LTR before the guy sells it or I may not come across another deal like this.
Posted by: XCAdam89
quote:
Originally posted by Cody_300ex
Sorry about the wait on the nerfs, they should be shipped tommrow. Ive been on spring break all last week.
That's fine, I'm in no hurry really.
Posted by: JIMFROMTEXCO
rear brake system and sterring stem
Posted by: Cody_300ex
quote:
Originally posted by JIMFROMTEXCO
rear brake system and sterring stem
rear brake system is sold, I still have the steering stem.
Posted by: thebrahamkid
To the top for ya!
Thanks for the axle, hubs, and rear brake! Everything working great!!!!
Ryan
Posted by: Cody_300ex
quote:
Originally posted by thebrahamkid
To the top for ya!
Thanks for the axle, hubs, and rear brake! Everything working great!!!!
Ryan
No Problem, Glad they worked out good!
Posted by: XCAdam89
quote:
Originally posted by Cody_300ex
Sorry about the wait on the nerfs, they should be shipped tommrow. Ive been on spring break all last week.
Just want to verify they have been shipped?
Posted by: Caseys 300ex
pm'ed
Posted by: Caseys 300ex
Can you put up a picture of your chain and 4 sprockets plz. Ill buy them but i want to see a picture first. Thanks! Also can you pm me your address so i can send out a m/o. Thanks
Posted by: Caseys 300ex
I dont mean to rush you but i need the sprockets and chain bad. 
Posted by: Cody_300ex
Bump
Posted by: mr2turbo
quote:
Originally posted by Cody_300ex
[SIZE=3][B]NO LOWBALL OFFERS!!![/SIZE]
Full chain and sproket set - A 13 & a 15 tooth front sproket, a 38 & 33 tooth Rear sproket, and a DID O-ring chain that has maybe 10 hours on it at the most. - Make offers
Just ask about anything else, I have a garage full of parts for it.... PRICES REDUCED!!!!
I have no idea what this stuff costs but I was wondering how much you would want shipped for this stuff, and also if you have a rear axle because mine is slightly bent.
Also all the stuff that goes on the handle bars(headlight, plastic, ignition, and all the oil and neutral light) I think you know what i'm talking about.
Posted by: Cody_300ex
quote:
Originally posted by mr2turbo
I have no idea what this stuff costs but I was wondering how much you would want shipped for this stuff, and also if you have a rear axle because mine is slightly bent.
Also all the stuff that goes on the handle bars(headlight, plastic, ignition, and all the oil and neutral light) I think you know what i'm talking about.
I dont have any of the stuff from the handlebars, nor the axle, I do still have all the sprokets and chain stuff. I'll PM you the Price.
Posted by: amx_#02
you still have those yfz450 front shocks??
Posted by: Cody_300ex
quote:
Originally posted by amx_#02
you still have those yfz450 front shocks??
Still have them
Posted by: JIMFROMTEXCO
how much on the shocks now?
Posted by: Cody_300ex
205 Shipped on the YFZ front shocks
Posted by: amx_#02
i may be intrested in those shocks i'll no for sure tomorrow
Posted by: amx_#02
hey i won some ohlins shocks off ebay so im not gonna get those yfz450 i may be needing some other parts i'll let you no when i figure out wat all i need
Posted by: Cody_300ex
quote:
Originally posted by amx_#02
hey i won some ohlins shocks off ebay so im not gonna get those yfz450 i may be needing some other parts i'll let you no when i figure out wat all i need
Ok thanks for letting me know, Just Pm me if you need anythign else.
Posted by: mr2turbo
sorry for the delay but last weekend I went up north riding and broke my atv; so right now I need to get it running before I buy stuff to make it fast! I'll let you know once I have it going and see if you still have the chain and sprockets because I am still interested!
Posted by: Cody_300ex
quote:
Originally posted by mr2turbo
sorry for the delay but last weekend I went up north riding and broke my atv; so right now I need to get it running before I buy stuff to make it fast! I'll let you know once I have it going and see if you still have the chain and sprockets because I am still interested!
I still have it all.
Posted by: Cody_300ex
Updated
Posted by: Cody_300ex
bump
Posted by: amx_#02
my cuz'n has been buggin me about my swingarm skidplate so ive been looking for him one...do you still have that 1 and if ya do how much
Posted by: Cody_300ex
quote:
Originally posted by amx_#02
my cuz'n has been buggin me about my swingarm skidplate so ive been looking for him one...do you still have that 1 and if ya do how much
I got a modded stock for i'll sell ya for 27 shipped
Posted by: amx_#02
alrite i'll give you a shout when i talk to him
Posted by: amx_#02
he wants to no if you'd take 20?
Posted by: Cody_300ex
quote:
Originally posted by amx_#02
he wants to no if you'd take 20?
I need 27 to cover shipping,..
Posted by: amx_#02
when he gets me the 27 dollars i'll send you a money order could you pm me your address
Posted by: 67mopar
do ya still have the maier race cut fenders?
Posted by: Cody_300ex
quote:
Originally posted by 67mopar
do ya still have the maier race cut fenders?
Still got em
Posted by: 67mopar
do ya have a picture of them
Posted by: Cody_300ex
plastics
Posted by: Cody_300ex
Still have a bunch of parts
Posted by: JBacon
Do you still have the 400ex front works shocks? Or the good one at least?
Posted by: Cody_300ex
quote:
Originally posted by JBacon
Do you still have the 400ex front works shocks? Or the good one at least?
sent you a PM
Posted by: JBacon
quote:
Originally posted by Cody_300ex
sent you a PM
I never got it???
Posted by: brads01ws6
could you send pictures of you mier plastic to brads94z28@Yahoo.com
Posted by: Cody_300ex
quote:
Originally posted by brads01ws6
could you send pictures of you mier plastic to brads94z28@Yahoo.com
Sorry, there sold
Posted by: Cody_300ex
Bump, still have quite a bit of these parts left!
Posted by: u_want_some
Muffler? Nerfs? Bars? Rear brake caliper?
Posted by: Cody_300ex
Hey guys I still have the parts listed, I updated the list. These parts are doing me no good what-so-ever, they have been sitting around my house and garage since May, I'm ready to get rid of them, and if you dont see anything up there I have Just IM, or PM me and ask! I have a LTR these parts are just taking up room for LTR parts....
Posted by: honda300EXtreme
hey,, is there any chance you have a swingarm pivot bolt you would let go cheap...
thanks
Posted by: Cody_300ex
quote:
Originally posted by honda300EXtreme
hey,, is there any chance you have a swingarm pivot bolt you would let go cheap...
thanks
I went out and looked and I have one but its trashed from removing it, its still straight, just the threads are done for. Sorry
Posted by: MY FYN 79
Do you still have the hubs and tie rods? If so, do the tie rods have good ends on them?
Posted by: Cody_300ex
I have the hubs. No tie rods or ends, sorry.
Posted by: Caseys 300ex
Do you have a headlight laying around thats red?
Posted by: Cody_300ex
quote:
Originally posted by Caseys 300ex
Do you have a headlight laying around thats red?
Nope, sorry.
Posted by: MY FYN 79
How much for the hubs?
Posted by: Cody_300ex
quote:
Originally posted by MY FYN 79
How much for the hubs?
Front? Rear? or Both?
Posted by: MY FYN 79
Fronts only.
Posted by: Cody_300ex
45 Shipped
Posted by: TRX-330
do you have the handle bar clamp still and is it for fatty bars, if so how much shipped.
Posted by: 1995300ex/400ex
how much for the exhaust and header and what kind are they?
Posted by: Cody_300ex
quote:
Originally posted by 1995300ex/400ex
how much for the exhaust and header and what kind are they?
They have been sold
Posted by: amx_#02
do you still the LT a-arms and if so do you still have the tie-rodes?? if so i'll may be intrested
Posted by: Cody_300ex
quote:
Originally posted by amx_#02
do you still the LT a-arms and if so do you still have the tie-rodes?? if so i'll may be intrested
STill have them
Posted by: amx_#02
alrite how low would u go on the price?
Posted by: Cody_300ex
quote:
Originally posted by amx_#02
alrite how low would u go on the price?
350 is the lowest I will go...
Posted by: d kelley
do you have a fuel tank for the 300??
Posted by: Cody_300ex
quote:
Originally posted by d kelley
do you have a fuel tank for the 300??
no fuel Tanks
Posted by: honda300EXtreme
hey,
please tell me you have an inner left side case
the one with the oil drain bolt on the bottom
let me know
thanks alot
-mike
Posted by: Cody_300ex
quote:
Originally posted by honda300EXtreme
hey,
please tell me you have an inner left side case
the one with the oil drain bolt on the bottom
let me know
thanks alot
-mike
Sure Don't, sorry.
Posted by: honda300EXtreme
hey i have a few questions about the works front shocks
what is your bottom dollar?
so the other shocks is in perfect working condition?
do they have rezzy's?
can you get some pics?
thanks alot
-mike
Posted by: sadinkins
i am interested in the a-arms,i am in ky how much for them and when could you ship them?
Posted by: Jake250ex
I havent read thru all 12 pages, but if you want to deal a little on the shocks and A arms pm me
Posted by: Cody_300ex
Bump, Updated. I'm tired of looking at this stuff in my basement, need more room, and money.
Posted by: JIMFROMTEXCO
make me a deal on the rear plastic, stem, and 400ex shocks
Posted by: Cody_300ex
Im bumping this up again, These parts have just been sitting her for over a year now, they need a new home and I need money for the LTR and my car! Also I am not on here everyday anymore and my e-mail notifications do not work so if I don't respond to a thread or PM E-mail me!
Posted by: AGPallstar109
cody i want to buy your a-arms get back to me, ive been trying to get a hold of you forever, i have the money and im ready, thanks mike
Posted by: Cody_300ex
Stuff is still here and everybody who says there interested in the a-arms has yet to come threw with money....
Posted by: Project300
Intersted in cdi, and nerf bars and aftermarket grab bar if you have one.
Let me know
Posted by: Cody_300ex
quote:
Originally posted by Project300
Intersted in cdi, and nerf bars and aftermarket grab bar if you have one.
Let me know
still have the CDI
Posted by: twisted300ex
u still have the swing arm? and if so how much?
vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray
