[clutch problems] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

clutch problems
(Click here to view the original thread with full colors/images)

Posted by: honda400exrider

my nuetral light goes on when i pull in the clutch in. also theres no "spring" until the clutch is half way in. why is this?

Posted by: Ben

Well the easiest, and first, things I would check are: 1. Is your clutch cable adjusted properly? 2. Is your neutral "plug" loose (it plugs into the engine case near the shifter? 3. Is your clutch cable old and possibly stretched beyond spec? I have had all three of these scenarios occur to my 400ex at one time or another and these three steps solved them each time. Of course it is possible your clutch is going out but I would check the easier things (as listed above) first. My 400's neutral light pretty much came on and went off whenever it felt like it, which was a direct result of the plug gaining and losing its connection at different points. It will not hurt anything but I understand your annoyance.

Posted by: lil400exman

to get the nuetral; light to work you take it off thhen clean it out real goo load it up with dieletric grease then take needlenose vise grips and get it real tight and you nuetal light will always work good! mine did!:devil

Posted by: Ben

Be careful when re-attaching the neutral plug because my buddy damaged his when he reattached it (he crushed the plug) - the connectivity was never the same.

Posted by: JabberJaw

Nuetral is for wussies...

Posted by: Sparks425Ex

When in doubt? Jabber is there with a smart *** coment to brighten up your life.

Posted by: Ben

hehe - so is spelling eh Jabber?

Posted by: JabberJaw

Ooops! hehehhe

Posted by: honda400exrider

i adjusted the clutch and its working fine, i didnt get a chance to fix the nuetral light yet. to late. ill try it 2morrow