[can't get blaster running right] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

can't get blaster running right
(Click here to view the original thread with full colors/images)

Posted by: madfastbanshee4

i can't get my blaster running right. i have a hetrick pipe and a air filter with reeds. the problem is that i can't reach full throttle some times and i do i have to blip the throttle or else it will stay on that rpm. im running a 270 main jet. does anyone have any idea wat the problem could be?

Posted by: Exrider434

i dont know if this is the same thing but on my brothers blaster there is a switch on the e-brake that wont let the quad rev up while the e-brake is on. Sometimes when the switch gets wet or muddy it will go on for some reason..

Posted by: blasterfreak99

Take the hood off and there should be a plugin to the right unplug. It and see if it helps. You might be running it too rich.

Posted by: banchee dave

other than the pipe and the reeds, what else have you done or havn't done to the bike?air filter? oil block-off? tores removed? parking brake removed along with perch? hows the plug looking, a 270 main jet sounds a bit small.big bore, stock bore? has it been rebuilt on the top end at all? just want to get a little more info. if you do still have the tores on the bike, I would suggest you get the tores removal kit and do what I did to mine and go through the wiring and remove the un-needed wires. i went with a 250r carb and thats what I did, if that is your problem. I know that will solve any problem associated with the tores.

Posted by: madfastbanshee4

have the oil injection blocked off, new wiseco topend. i put a 290 in it. it will only run good with the airbox lid off

Posted by: blasterfreak99

well then you are jetted lean (i think) and either run it with the airbox lid off and put an outerwears cover on it or rejet

Posted by: lilbstory

Take the hood off and there should be a plugin to the right unplug. It and see if it helps. You might be running it too rich.

i have noticed this unpluged on mine i think i was just wonderin what it did

Posted by: madfastbanshee4

i got a ehs lid for it

Posted by: blasterfreak99

quote:
Originally posted by lilbstory
Take the hood off and there should be a plugin to the right unplug. It and see if it helps. You might be running it too rich.

i have noticed this unpluged on mine i think i was just wonderin what it did

i am not sure what it is. it was unplugged on mine and i plugged it up because i thought it was the headlight and it would start but only for a second and then die. i unplugged it and it fixed it.

Posted by: 2muchquad

a 290 main sounds way too big...