[ITP Front Rims] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

ITP Front Rims
(Click here to view the original thread with full colors/images)

Posted by: bmxatv

I just purchased a set of black T-9's with holeshots for the rear of my quad and they look *****in'. I've looked high and low and from what I've found ITP does not make this same rim for the front in a 22x7-10. I'm assuming that means it's a 10" rim correct? Can I drop to a 9" rim without making any modifications i.e. wheel spacers or anything. What should I do? I want the same setup for the front as I have in the rear (black T-9's on holeshots). Any suggestions guys?

Posted by: Colby@C&DRacing

If it is a t9 you can get them in black in a 10x5

Posted by: johng

I just bought some from Golden West, about $55 ea

Posted by: underpowered

yup they do makea black t-9 for the front. you want a 10x5 wheel, 4x144 bolt pattern. but you cannot drop to a 9' wheel up front. first of all it will not fit over the brake caliper, and secondly you would have a hell of a time finding tires. i have never seen a 9" front wheel, most are 10",, smaller quads us an 8", and utes use a 12" with some using an 11"

Posted by: bmxatv

i'm confused.......22x7-10 means and correct me if I'm wrong:

22"-Tire height
7"-Rim width
10"-Rim height

So you're saying I can drop 2" on the front rim width but stay at the 10" rim height? Just want to make sure I understood. So I can mount a 22" tire on a 10x5 rim right? What other tire sizes can I run on a 10x5?

Posted by: underpowered

22x7x10 is the tire size, no the wheel size. 22" tall, 7" wide at the widest point on the tire, 10" wheel. the 7" has nothing to do with the wheel, but with the tire. a stock 400ex wheel is 10x5.5" you can use virtually any size front tire you want to on a 10"x5" wheel.

Posted by: bmxatv

thanks guys. much appreciated.

Posted by: MO-EX-RIDER

^^^^pm sent